Back Cover Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          10 - 15 minutes

Sections

Back Cover
3 steps

Flags

BackZoomer Dino Boomer
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Back Cover

Power off Zoomer Dino Boomer before disassembly.
Remove the eight 9.3mm Phillips #1 screws.

Power off Zoomer Dino Boomer before disassembly.

Remove the eight 9.3mm Phillips #1 screws.

1024

Step 2

Turn dinosaur over and hold upright.
Use the spudger to pry apart the back cover from the remainder of the Zoomer Dino Boomer.
Be gentle while removing the back cover. The back cover of the Zoomer Dino Boomer is still connected to the electronic system by a wire.

Turn dinosaur over and hold upright.

Use the spudger to pry apart the back cover from the remainder of the Zoomer Dino Boomer.

Be gentle while removing the back cover. The back cover of the Zoomer Dino Boomer is still connected to the electronic system by a wire.

Step 3

Disconnect the wire that connects the back cover of the dino to the main circuit board by carefully pulling on the orange wire connector with tweezers.
Remove back cover.
If you are having difficulty removing the connector from its socket, push in the small tabs on the side of the connector with the tweezers. This step may take some work.
Do not damage the wires or circuit board.

Disconnect the wire that connects the back cover of the dino to the main circuit board by carefully pulling on the orange wire connector with tweezers.

Remove back cover.

If you are having difficulty removing the connector from its socket, push in the small tabs on the side of the connector with the tweezers. This step may take some work.

Do not damage the wires or circuit board.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors

                    Desiree DesJardins

Member since: 09/02/2015

450 Reputation

                                      2 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges

Team

                       USF Tampa, Team 16-1, Wollert Fall 2015                        

                                                  Member of USF Tampa, Team 16-1, Wollert Fall 2015 



                    USFT-WOLLERT-F15S16G1                     


                                            3 Members                     


                                            5 Guides authored

Introduction#

What you need#

#

#

#

#

#

Team#

#

Introduction

What you need

Team