Difficulty

Moderate

Steps

3

Time Required

                          45 minutes

Sections

1

  • Back Panel
  • 3 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackGameStop GS3 GameCube Controller

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Panel
  • First, remove the 6 screws in the back panel and pull the back panel off.
  • Separate the halves of the controller. However, be careful when separating due to the little wires that could get mixed up.

First, remove the 6 screws in the back panel and pull the back panel off.

Separate the halves of the controller. However, be careful when separating due to the little wires that could get mixed up.

1024

Step 2

  • Next, remove the rumble motor by unscrewing the 2 screws connecting it.

Next, remove the rumble motor by unscrewing the 2 screws connecting it.

Step 3

  • Finally remove the screws holding in the right and left triggers. It’s easiest to hold the trigger together as shown in the third picture. Remove both the left and right trigger, and then you have successfully removed your back panel.

Finally remove the screws holding in the right and left triggers. It’s easiest to hold the trigger together as shown in the third picture. Remove both the left and right trigger, and then you have successfully removed your back panel.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 6 other contributors 


                    David Mistretta

Member since: 10/26/2016

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       UMass Dartmouth, Team 3-5, Isaacson Fall 2016                        

                                                  Member of UMass Dartmouth, Team 3-5, Isaacson Fall 2016 



                    UMASSD-ISAACSON-F16S3G5                     


                                            3 Members                     


                                            10 Guides authored