Bandschleifer Parkside Pbs 600 A1 Drivebelt Replacement Repair Guide

Difficulty

Easy

Steps

3

Time Required

                          10 - 30 minutes            

Sections

1

• Drivebelt
• 3 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackBandschleifer Parkside PBS 600 A1

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Open the housing               

• Remove the 3 screws with a Phillips screwdriver. Pull off the black cap upwards. She might be a little tight.

Remove the 3 screws with a Phillips screwdriver. Pull off the black cap upwards. She might be a little tight.

1024

Step 2

              Drivebelt removal               

• Pull the drivebelt upwards

Pull the drivebelt upwards

Step 3

              Check the drivebelt               

• Check that the teeth are not worn as shown in the photo. The belt is 201mm long, 14mm wide and the teeth are 3mm apart.

Check that the teeth are not worn as shown in the photo. The belt is 201mm long, 14mm wide and the teeth are 3mm apart.

Follow the steps in reverse order to reassemble your device.

Cancel: I did not complete this guide.

        oldturkey03 is helping us fix the world!      Want to contribute?      Start translating › 

Special thanks to these translators:

100%

oldturkey03

Author

                                      with 1 other contributor 

                    kapott                     

Member since: 08/25/2015

1,351 Reputation

                                      7 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges