Difficulty

Moderate

Steps

10

Time Required

Suggest a time??

Sections

1

  • Screen
  • 10 steps

Flags

2

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackBarnes And Noble Nook Glowlight 3

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Step 1

              Screen
  • This is the Nook Glowlight 3. It features an eink display with a resolution of 300 ppi. The display is also Touchscreen. It comes with 8GB of Storage and the Total User Available Memory is 6.5 GB. It is also wifi compatible

This is the Nook Glowlight 3. It features an eink display with a resolution of 300 ppi. The display is also Touchscreen. It comes with 8GB of Storage and the Total User Available Memory is 6.5 GB. It is also wifi compatible

1024

Step 2

  • First Grab Your Jimmy or any other thin wedge tool and slide it along the edge of the device where the two halves meet.
  • Push firmly until the Jimmy gets wedged into the crack. Then rotate the Jimmy while sliding it down to separate the clips
  • Do This all around the device until the device is able to be split into two halves.

First Grab Your Jimmy or any other thin wedge tool and slide it along the edge of the device where the two halves meet.

Push firmly until the Jimmy gets wedged into the crack. Then rotate the Jimmy while sliding it down to separate the clips

Do This all around the device until the device is able to be split into two halves.

Step 3

  • When both of the halves are able to be separated move the back cover aside.
  • (To Reassemble push down on the back cover)

When both of the halves are able to be separated move the back cover aside.

(To Reassemble push down on the back cover)

Step 4

  • Remove the screws marked in red

Remove the screws marked in red

Step 5

  • Disconnect the battery with a flick of the spudger.

Disconnect the battery with a flick of the spudger.

Step 6

  • Tip: Before removing screws draw an outline of the device and place the screws where they are located on the device.

Tip: Before removing screws draw an outline of the device and place the screws where they are located on the device.

Step 7

  • On both sides, there are two straight and skinny button panels. These control the side up/down buttons. Please disconnect both of these ribbon cables.

On both sides, there are two straight and skinny button panels. These control the side up/down buttons. Please disconnect both of these ribbon cables.

Step 8

  • Now disconnect the display ribbon cables. ( one is hidden )

Now disconnect the display ribbon cables. ( one is hidden )

Step 9

  • Now lift the logic board

Now lift the logic board

Step 10

  • Now remove the battery by sliding a spudger underneath the battery and breaking the adhesive.

Now remove the battery by sliding a spudger underneath the battery and breaking the adhesive.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Joan Lee

Member since: 12/09/2019

463 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Ian Van Giesen - Dec 29, 2021

Reply

I’m afraid you did not get to include how the screen is disassembled.