Difficulty
Moderate
Steps
10
Time Required
Suggest a time??
Sections
1
- Screen
- 10 steps
Flags
2
Slice and Dice
The steps in this guide should be split up and made into a series of prerequisite guides.
Better Introduction
Improve this guide by completing or revising its introduction.
BackNook HD+
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Remove the front screen
- wedge the plastic opening piece underneath the bottom left hand corner of the front frame. Pry the frame off of the Nook.
wedge the plastic opening piece underneath the bottom left hand corner of the front frame. Pry the frame off of the Nook.
1024
Step 2
Remove the screws
- Remove every visible screw tying the chassis to the bottom frame using the T-4 attachment for the screwdriver in the iFixit screwdriver kit.
Remove every visible screw tying the chassis to the bottom frame using the T-4 attachment for the screwdriver in the iFixit screwdriver kit.
Step 3
Remove the chassis
Step 4
Detach battery
- detach the battery ribbon from the motherboard.
detach the battery ribbon from the motherboard.
Step 5
Flip the nook
- flip center chassis so that the back of the screen is facing you, and the hole is positioned in the bottom right corner.
flip center chassis so that the back of the screen is facing you, and the hole is positioned in the bottom right corner.
Step 6
Detach the screen from chassis part 1
- Remove copper tape above the antenna, 3 quarters of the way up the left side of the nook.
Remove copper tape above the antenna, 3 quarters of the way up the left side of the nook.
Step 7
Detach the screen from chassis part 2
- Locate thin orange strip on the top side of the motherboard. Apply tweezers to the black casing that locks it into the motherboard (plastic piece will completely come out).
Locate thin orange strip on the top side of the motherboard. Apply tweezers to the black casing that locks it into the motherboard (plastic piece will completely come out).
Step 8
Detach the screen from chassis part 3
- Locate the foam covered orange strip on the motherboard. Pull up (away from motherboard) so that it i no longer connected to the motherboard.
Locate the foam covered orange strip on the motherboard. Pull up (away from motherboard) so that it i no longer connected to the motherboard.
Step 9
Take motherboard away from the screen
- Lift motherboard away from the screen. Pull frame off of the screen.
Lift motherboard away from the screen. Pull frame off of the screen.
Step 10
Place new screen
- Put the new screen back into place in the frame (the reverse of step 9). Place motherboard back into place on the back of the screen. And follow steps in reverse order to reassemble.
Put the new screen back into place in the frame (the reverse of step 9). Place motherboard back into place on the back of the screen. And follow steps in reverse order to reassemble.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
9 other people completed this guide.
Author
with 1 other contributor
Elijah Gonsalves
Member since: 10/24/2014
1,028 Reputation
3 Guides authored
Badges:
10
+7 more badges
Team
UMass Dartmouth, Team 2-3, Duarte Fall 2014
Member of UMass Dartmouth, Team 2-3, Duarte Fall 2014
UMASSD-DUARTE-F14S2G3
5 Members
10 Guides authored
moreiragenesio - Sep 12, 2017
Reply
como faço para comprar a tela touch do tablet nook ce0984
sou de Fortaleza-Ceara - Brasil
meu e-mail é moreiragenesio@yahoo.com.br