Difficulty
Easy
Steps
2
Time Required
2 minutes
Sections
1
- Base Cover
- 2 steps
Flags
0
BackAlienware 17 R4
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Base Cover
- Use a PH1 screwdriver bit to remove the six M2.5x13 screws (2.4 mm) on the back of the laptop.
- Use a PH1 screwdriver bit to loosen the one M2x3 screw (1.9 mm).
- The M2x3 screw (1.9 mm) does not come out completely.
Use a PH1 screwdriver bit to remove the six M2.5x13 screws (2.4 mm) on the back of the laptop.
Use a PH1 screwdriver bit to loosen the one M2x3 screw (1.9 mm).
The M2x3 screw (1.9 mm) does not come out completely.
1024
Step 2
- Pull the base cover up to remove it.
- If you are having trouble, insert a plastic opening tool into the divots along the laptop’s edges to loosen.
- Removing the cover may require some force.
Pull the base cover up to remove it.
If you are having trouble, insert a plastic opening tool into the divots along the laptop’s edges to loosen.
Removing the cover may require some force.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Kiyan Mullen
Member since: 09/11/2017
409 Reputation
1 Guide authored
Badges:
16
+13 more badges
Team
CSU Fullerton, Team S2-G4, Bruce Fall 2017
Member of CSU Fullerton, Team S2-G4, Bruce Fall 2017
CSUF-BRUCE-F17S2G4
4 Members
9 Guides authored
