Difficulty
Moderate
Steps
6
Time Required
5 - 10 minutes
Sections
3
- Watch Strap
- 2 steps
- Back Plate
- 1 step
- Battery
- 3 steps
Flags
1
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
BackBasis B1 Band
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Watch Strap
- Wedge a plastic opening tool between band contacts.
Wedge a plastic opening tool between band contacts.
1024
Step 2
- Push in plastic opening tool until the components click and pop out of the holder.
- Repeat steps for other band.
Push in plastic opening tool until the components click and pop out of the holder.
Repeat steps for other band.
Step 3
Back Plate
- Remove four 4mm screws using a PH000 screwdriver.
- Remove back plate.
Remove four 4mm screws using a PH000 screwdriver.
Remove back plate.
Step 4
Battery
- Use tweezers to remove elastomeric, or zebra, connector.
Use tweezers to remove elastomeric, or zebra, connector.
Step 5
- Use the flat end of the spudger to carefully lift the battery until adhesive seal is broken.
Use the flat end of the spudger to carefully lift the battery until adhesive seal is broken.
Step 6
- Use the pointy edge of the spudger tool to detach battery leads from the circuit board.
Use the pointy edge of the spudger tool to detach battery leads from the circuit board.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 2 other contributors
Kaitlyn Lee
Member since: 11/06/2017
518 Reputation
4 Guides authored
Badges:
7
+4 more badges
Team
IUPUI, Team S6-G1, Baechle Fall 2017
Member of IUPUI, Team S6-G1, Baechle Fall 2017
IUPUI-BAECHLE-F17S6G1
4 Members
4 Guides authored
