Difficulty

Easy

Steps

5

Time Required

                          15 minutes

Sections

2

  • Frame
  • 4 steps
  • Screen
  • 1 step

Flags

0

  • BackBasis Peak

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Frame
  • Flip the watch over and orient it such that the buckle is away from you and the back panel is revealed.
  • Maintain this orientation to follow the guide.

Flip the watch over and orient it such that the buckle is away from you and the back panel is revealed.

Maintain this orientation to follow the guide.

1024

Step 2

  • Remove the four base screws using a size 2 TORX screwdriver to separate the back plate from the frame.

Remove the four base screws using a size 2 TORX screwdriver to separate the back plate from the frame.

Step 3

  • Disconnect the ribbon cable on the left side of the motherboard by using a spudger.

Disconnect the ribbon cable on the left side of the motherboard by using a spudger.

Step 4

  • Use a spudger and apply pressure to the white plastic wall to the right of the motherboard. Use this to lever the electronics out of the frame.
  • The clips have small lips that you can put the spudger under to get more leverage.
  • Using any of the metal to pry out the electronics may damage some of the wiring. It is crucial to only press on the plastic.

Use a spudger and apply pressure to the white plastic wall to the right of the motherboard. Use this to lever the electronics out of the frame.

The clips have small lips that you can put the spudger under to get more leverage.

Using any of the metal to pry out the electronics may damage some of the wiring. It is crucial to only press on the plastic.

Step 5

              Screen
  • Flip over the motherboard complex and gently remove the screen with your fingers.

Flip over the motherboard complex and gently remove the screen with your fingers.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Steph

Member since: 04/06/2017

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       UMass Dartmouth, Team S4-G4, Julie Spring 2017                        

                                                  Member of UMass Dartmouth, Team S4-G4, Julie Spring 2017 



                    UMASSD-JULIE-S17S4G4                     


                                            4 Members                     


                                            5 Guides authored