Difficulty
Moderate
Steps
4
Time Required
25 minutes
Sections
1
- Fuse
- 4 steps
Flags
0
BackBear 1000 Ventilator
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Fuse
- Use a screwdriver to push in and turn the fuse holder counterclockwise until it disengages.
Use a screwdriver to push in and turn the fuse holder counterclockwise until it disengages.
1024
Step 2
- Retain the cap which holds the fuse, and replace the fuse in the cap with a new appropriately rated fuse.
Retain the cap which holds the fuse, and replace the fuse in the cap with a new appropriately rated fuse.
Step 3
- Insert the cap back into the ventilator.
Insert the cap back into the ventilator.
Step 4
- Using a screwdriver, press it in, and rotate it clockwise.
Using a screwdriver, press it in, and rotate it clockwise.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Eli Ferman
Member since: 04/08/2020
607 Reputation
4 Guides authored
Badges:
7
+4 more badges
Team
Cal Poly, Team S7-G12, Paton Fall 2020
Member of Cal Poly, Team S7-G12, Paton Fall 2020
CPSU-PATON-F20S7G12
2 Members
6 Guides authored
