Difficulty

Very difficult

Steps

8

Time Required

                          30 minutes - 2 hours

Sections

1

  • Core Wire
  • 8 steps

Flags

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

  • BackBeats Solo 2

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Core Wire
  • Pull out the wire from the beats. The wire is a jack wire and requires nothing special to remove.

Pull out the wire from the beats. The wire is a jack wire and requires nothing special to remove.

1024

Step 2

  • Remove the ear cushions from the headset. The preferred method to do this is to use a screwdriver and pry the cushions off.

Remove the ear cushions from the headset. The preferred method to do this is to use a screwdriver and pry the cushions off.

Step 3

  • Remove the second cushion until both cushions are removed.

Remove the second cushion until both cushions are removed.

Step 4

  • Remove the screws from both ear bases.

Remove the screws from both ear bases.

Step 5

  • Once the screws are removed, pop off the inner speakers. Do this for both sides

Once the screws are removed, pop off the inner speakers. Do this for both sides

Step 6

  • After you have removed the second internal speaker, you can begin the process of removing the wire. BE CAREFUL with this step, make sure you don’t pull off the circuit board.

After you have removed the second internal speaker, you can begin the process of removing the wire. BE CAREFUL with this step, make sure you don’t pull off the circuit board.

Step 7

  • Now we are going to remove the circuit board holder. Take off the white cover to get access to the screw. Then remove the screw and circuit board holder.

Now we are going to remove the circuit board holder. Take off the white cover to get access to the screw. Then remove the screw and circuit board holder.

Step 8

  • slowly pry away cover

slowly pry away cover

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      8 other people completed this guide.

Author

                                      with 3 other contributors 


                    Darien Jewel

Member since: 11/28/2016

221 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       Coast Union High School, Team 1-4, Hartzell Fall 2016                        

                                                  Member of Coast Union High School, Team 1-4, Hartzell Fall 2016 



                    CUHS-HARTZELL-F16S1G4                     


                                            4 Members                     


                                            2 Guides authored