Difficulty

Moderate

Steps

7

Time Required

                          25 - 35 minutes

Sections

1

  • Headband
  • 7 steps

Flags

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackBeats Solo3

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

The headband is the main support. It connects both speakers, hoses the connecting wires from the left to the right sides of the head phone, and gives the rigid flex when the headphones are worn over the head.

To use this guide, be sure to have purchased the right part for your headphones at amazon.com. Typically, this device would be replaced, but this is a cost efficient way to bring the device back to live.

Power off the device before fixing to avoid any electrical failures.

What you need

Step 1

              Headband
  • Carefully remove the headband cushion cover to expose the screws underneath.

Carefully remove the headband cushion cover to expose the screws underneath.

1024

Step 2

  • Unscrew all four 1.4 mm screws on the right and left ends on the underside of the headband using a T5 Torx screwdriver.

Unscrew all four 1.4 mm screws on the right and left ends on the underside of the headband using a T5 Torx screwdriver.

Step 3

  • Disconnect the rubber band from the hook.

Disconnect the rubber band from the hook.

Step 4

  • Remove the inner headband by gently prying the edges and corners.

Remove the inner headband by gently prying the edges and corners.

Step 5

  • Carefully peel up the glued wire in the headband.

Carefully peel up the glued wire in the headband.

Step 6

  • Pull the headband out of the slots gently.

Pull the headband out of the slots gently.

Step 7

  • Put the new headband into the slots carefully.

Put the new headband into the slots carefully.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 5 other contributors 


                    Joseph Konadu

Member since: 03/24/2021

196 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       UMass Dartmouth, Team S1-G13, Riel Spring 2021                        

                                                  Member of UMass Dartmouth, Team S1-G13, Riel Spring 2021 



                    UMASSD-RIEL-S21S1G13                     


                                            1 Member                     


                                            2 Guides authored