Difficulty

Easy

Steps

5

Time Required

                          5 minutes

Sections

1

  • Motherboard
  • 5 steps

Flags

0

  • BackBeats Solo3

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Motherboard
  • Use an opening tool to open the headband at the color seam.
  • The audio board is located inside the “Left” ear cup.

Use an opening tool to open the headband at the color seam.

The audio board is located inside the “Left” ear cup.

1024

Step 2

  • Use a pair of tweezers to carefully remove the yellow polyimide tape that is attached to the morherboard.

Use a pair of tweezers to carefully remove the yellow polyimide tape that is attached to the morherboard.

Step 3

  • There will be three bundled cables attached to the motherboard. Carefully pull them out of each prong.
  • Make sure to take note of which one belongs where for reassembly later.

There will be three bundled cables attached to the motherboard. Carefully pull them out of each prong.

Make sure to take note of which one belongs where for reassembly later.

Step 4

  • Use a Phillips #00 screwdriver to remove the four screws that hold the motherboard in place.
  • The cap on the outside of the headphones will fall off once the final screw is removed. Do not fear that something broke. Simply reattach during reassembly phase

Use a Phillips #00 screwdriver to remove the four screws that hold the motherboard in place.

The cap on the outside of the headphones will fall off once the final screw is removed. Do not fear that something broke. Simply reattach during reassembly phase

Step 5

  • Finally, remove and replace the motherboard.

Finally, remove and replace the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Jakub Karl

Member since: 03/21/2022

171 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       University of Alabama, Team 1-2, Bedsole Spring 2022                        

                                                  Member of University of Alabama, Team 1-2, Bedsole Spring 2022 



                    UA-BEDSOLE-S22S1G2                     


                                            4 Members                     


                                            8 Guides authored