Difficulty

Moderate

Steps

4

Time Required

                          30 minutes            

Sections

1

  • Side panel
  • 4 steps

Flags

2

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackBeats Solo Pro

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Extending the Headphones               
  • Slide the headphones down to extend the hinge.

Slide the headphones down to extend the hinge.

1024

Step 2

              Prying off the side panel               
  • Once extended insert a prying the new gap to unclip the panel
  • Once unclipped repeat on the other side of the panel

Once extended insert a prying the new gap to unclip the panel

Once unclipped repeat on the other side of the panel

Step 3

              Sliding out the side panel               
  • Slide the panel down and lift away from the headphone just until its separated
  • Don’t pull the plastic piece offs there is still cables attached to it

Slide the panel down and lift away from the headphone just until its separated

Don’t pull the plastic piece offs there is still cables attached to it

Step 4

              Tightening or replacing               
  • If needed tighten the PH00 screw(if your side panel has came loose on it own you will need to do this to fix the issue)
  • If you want to replace the side panel you will need to carefully pry the cables out from where they are glued in and glue them in to the new panel(refer to second image)

If needed tighten the PH00 screw(if your side panel has came loose on it own you will need to do this to fix the issue)

If you want to replace the side panel you will need to carefully pry the cables out from where they are glued in and glue them in to the new panel(refer to second image)

To reassemble complete steps in reverse:-)

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    HelloMacOS                     

Member since: 01/24/2022

21,051 Reputation

                                      8 Guides authored                  



                       Badges:
                       35







                                                        +32 more badges                           

Team

                       Repair is War on Entropy                        

                                                  Member of Repair is War on Entropy 



                    Community                     


                                            5 Members                     


                                            201 Guides authored