Difficulty
Moderate
Steps
7
Time Required
20 - 30 minutes
Sections
1
- Ear Cushion
- 7 steps
Flags
Incorrect Tools
Help make this guide better by using the correct tools in images and/or text.
BackBeats Studio3
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Ear Cushion
- Gently use the spudger to pry the cushions from the headphones.
Gently use the spudger to pry the cushions from the headphones.
1024
Step 2
- Remove the remaining adhesive by making circular movements around the rim of the headset with the provided Isopropyl Alcohol wipe.
- This step is key. If the removal of the adhesive is not thorough, you may have issues with the new adhesive.
Remove the remaining adhesive by making circular movements around the rim of the headset with the provided Isopropyl Alcohol wipe.
This step is key. If the removal of the adhesive is not thorough, you may have issues with the new adhesive.
Step 3
- The line indicates that the side is supposed to represent the bottom when attaching to your headphones.
- Please also remember that the right ear cushion is unique because it makes space for the USB charging port.
The line indicates that the side is supposed to represent the bottom when attaching to your headphones.
Please also remember that the right ear cushion is unique because it makes space for the USB charging port.
Step 4
- Remove the sticker on the new pair of cushions to reveal the adhesive by pulling on the red tab to the side.
- Do not touch the adhesive ring or lay it on a surface facing downwards. This could cause the adhesive to obtain fingerprints or, collect dust which could make it less effective at attaching to your headphones.
Remove the sticker on the new pair of cushions to reveal the adhesive by pulling on the red tab to the side.
Do not touch the adhesive ring or lay it on a surface facing downwards. This could cause the adhesive to obtain fingerprints or, collect dust which could make it less effective at attaching to your headphones.
Step 5
- Realign and move as needed to match the circles on the adhesive on the earpad with the screws on your headphones.
Realign and move as needed to match the circles on the adhesive on the earpad with the screws on your headphones.
Step 6
- Once aligned and placed properly, push on your pad for 1 minute to activate the adhesive by clamping your hands together as tight as possible.
Once aligned and placed properly, push on your pad for 1 minute to activate the adhesive by clamping your hands together as tight as possible.
Step 7
- Put an object between your headphones to apply pressure for 24 hours to close any gaps.
- Do not overstretch your headphones. This can break them. Please apply a decent amount of compression, nothing excessive.
Put an object between your headphones to apply pressure for 24 hours to close any gaps.
Do not overstretch your headphones. This can break them. Please apply a decent amount of compression, nothing excessive.
There you go! You have completed the guide. You are able to wear the headphones as usual after the 24 hour period. Please dispose of the old ear cushions and clean up your mess!
Cancel: I did not complete this guide.
4 other people completed this guide.
Author
with 2 other contributors
Haydar
Member since: 01/26/2021
235 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
York University, Team S2-G1, O'Regan Winter 2021
Member of York University, Team S2-G1, O'Regan Winter 2021
YORK-O'REGAN-W21S2G1
2 Members
2 Guides authored
Angel Manuel - 4 days agoJan 19, 2023
Reply
Muchas gracias tanto al autor de la guía de reparación como al traductor de la misma.
