Beats Studio First Generation Ear Cushion Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          5 minutes

Sections

Ear Cushion
2 steps

Flags

BackBeats By Dre Studio First Generation
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Removing the ear cushion.

Pinch the ear cushion between your thumb and forefinger.
Be very careful when pulling off the ear cushion, as the material holding the cushion onto the plastic ring can rip easily.
Carefully pull the cushion directly away from the earpiece.
The cushion will have a thin piece of foam inside of it that may fall out upon removal. Make sure to save this for reassembly.
Repeat for the other ear cushion.

Pinch the ear cushion between your thumb and forefinger.

Be very careful when pulling off the ear cushion, as the material holding the cushion onto the plastic ring can rip easily.

Carefully pull the cushion directly away from the earpiece.

The cushion will have a thin piece of foam inside of it that may fall out upon removal. Make sure to save this for reassembly.

Repeat for the other ear cushion.

1024

Step 2

              Removing the plastic ring.

Use the plastic opening tool to remove the black ring from the speaker. This will allow you to access the screws on the metal ring.
Congratulations, you now have access to the rest of the speaker!
For reassembly, the black ring cannot snap back into the speaker the way it was disassembled. It must first go inside the black lip of the ear cushion. The black lip is located on the back side of the ear cushion. Please refer to the last two pictures on this step.
The black lip is located on the back side of the ear cushion.

Use the plastic opening tool to remove the black ring from the speaker. This will allow you to access the screws on the metal ring.

Congratulations, you now have access to the rest of the speaker!

For reassembly, the black ring cannot snap back into the speaker the way it was disassembled. It must first go inside the black lip of the ear cushion. The black lip is located on the back side of the ear cushion. Please refer to the last two pictures on this step.

The black lip is located on the back side of the ear cushion.

Cancel: I did not complete this guide.

                                                                                      15 other people completed this guide.

Author

                                      with 6 other contributors

                    Anand Mangal

Member since: 04/15/2014

1,040 Reputation

                                      2 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Cal Poly, Team 9-18, Regan Spring 2014                        

                                                  Member of Cal Poly, Team 9-18, Regan Spring 2014 



                    CPSU-REGAN-S14S9G18                     


                                            4 Members                     


                                            10 Guides authored

IGNACIO GREIFFENSTEIN - Sep 9, 2016

De nada me sirve saber cómo colocarlos si no sé donde conseguirlos… Ese debería ser el paso 1 del instructivo…

Chris h - Apr 9, 2018

What if I break the black ring where do I get a replacement

Jade ijeh - Dec 11, 2020

Hi - do you know where i can buy the replacement ear cushions for these particular headphones?

Cooper - Dec 11, 2020

Yes! We do offer these here:

Beats by Dre. Studio Headphone Earpiece Cushions

Beats by Dre. Studio Single Headphone Earpiece Cushion

Introduction#

What you need#

#

#

#

#

Team#

#

Introduction

What you need

Team