Difficulty

Moderate

Steps

11

Time Required

Suggest a time??

Sections

1

  • Behringer BCD3000 Disassembly
  • 11 steps

Flags

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackBehringer BCD3000

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Behringer BCD3000 Disassembly
  • Unplug from all cables

Unplug from all cables

1024

Step 2

              opening the sides
  • unscrew two Phillips screws on each side of the BCD3000
  • If the screws sit too tight, you can use the extension for better torque

unscrew two Phillips screws on each side of the BCD3000

If the screws sit too tight, you can use the extension for better torque

Step 3

              loosening the top part
  • unscrew another two Phillips screws on each side

unscrew another two Phillips screws on each side

Step 4

  • Lift the upper control part.
  • Be careful, there are still some cables connected to the lower section.
  • Disconnect the cables by walking them out of their sockets.

Lift the upper control part.

Be careful, there are still some cables connected to the lower section.

Disconnect the cables by walking them out of their sockets.

Step 5

  • Remove the upper part completely.

Remove the upper part completely.

Step 6

  • Disconnect the two cables from the lower section to the connector board.

Disconnect the two cables from the lower section to the connector board.

Step 7

  • Slide the lower section to the front.
  • Now you can lift it and take it aside.

Slide the lower section to the front.

Now you can lift it and take it aside.

Step 8

  • Disconnect the separate boards.
  • Now you can take the modules out by unscrewing them from the case.

Disconnect the separate boards.

Now you can take the modules out by unscrewing them from the case.

Step 9

  • The jog wheels on the front panel can be taken off by using a spudger and levering them out.

The jog wheels on the front panel can be taken off by using a spudger and levering them out.

Step 10

  • The knobs can easy be removed just by pulling.

The knobs can easy be removed just by pulling.

Step 11

  • Same goes for the knobs on the top section of the front panel.

Same goes for the knobs on the top section of the front panel.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 2 other contributors 


                    Tobias Isakeit

Member since: 03/31/2014

105,394 Reputation

                                      184 Guides authored                  



                       Badges:
                       46







                                                        +43 more badges

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,767 Guides authored

Antonio - Mar 18, 2021

Reply

Pensaba que serviría para la BCD2000… pero es algo distinta.

csipapicsa - Mar 20, 2021

Reply

great stuff, with better quality pictures would be better