Difficulty

Difficult

Steps

4

Time Required

Suggest a time??

Sections

1

  • LED Light
  • 4 steps

Flags

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackBeiens Cartoon RC Race Car

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              LED Light
  • Hold the remote control with the backside facing you and, using the Phillips #00 screwdriver, unscrew the six 6.5 mm screws on the back of the controller that hold it together.

Hold the remote control with the backside facing you and, using the Phillips #00 screwdriver, unscrew the six 6.5 mm screws on the back of the controller that hold it together.

1024

Step 2

  • Open the remote control.

Open the remote control.

Step 3

  • Lift the motherboard to separate it from the remote control.

Lift the motherboard to separate it from the remote control.

Step 4

  • To remove the light, use a soldering iron to heat the solder to a liquid and loosen the leads.
  • While the solder is liquid, lightly pull on the LED to remove it from the motherboard.
  • The soldering iron will get very hot while it’s in use. Be sure to place it on top of a heat protected surface and be careful not to touch the operational end.

To remove the light, use a soldering iron to heat the solder to a liquid and loosen the leads.

While the solder is liquid, lightly pull on the LED to remove it from the motherboard.

The soldering iron will get very hot while it’s in use. Be sure to place it on top of a heat protected surface and be careful not to touch the operational end.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Amber Ashley

Member since: 10/01/2015

329 Reputation

                                      4 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       USF Tampa, Team 1-6, Leahy Fall 2015                        

                                                  Member of USF Tampa, Team 1-6, Leahy Fall 2015 



                    USFT-LEAHY-F15S1G6                     


                                            3 Members                     


                                            4 Guides authored