Difficulty
Moderate
Steps
13
Time Required
15 minutes
Sections
1
- Battery
- 13 steps
Flags
Featured Student Guide
This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.
BackBelkin F5L114
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Batteries do not last forever, even rechargeable ones. Replacing the battery renews the life of the keyboard for many more years keeping it out of landfills.
Before starting, make sure that the battery is a possible issue. Use different chargers to test that a faulty charger is not the case. If no charger makes the keyboard turn on, the charging port on the device could be the issue.
Before beginning, make sure to unplug anything connected to the keyboard.
What you need
Step 1
Battery
- Switch the power button that is located at the bottom left of the keyboard to Off.
Switch the power button that is located at the bottom left of the keyboard to Off.
1024
Step 2
- Flip the keyboard over.
Flip the keyboard over.
Step 3
- Pull back gently on the left side of the bottom-left rubber foot enough to expose the small screw.
Pull back gently on the left side of the bottom-left rubber foot enough to expose the small screw.
Step 4
- Use a Phillips #0 screwdriver to unscrew the screw.
- The screw may not come fully out of the device.
Use a Phillips #0 screwdriver to unscrew the screw.
The screw may not come fully out of the device.
Step 5
- Pull back gently on the bottom left corner of the middle rubber foot enough to expose the small screw.
Pull back gently on the bottom left corner of the middle rubber foot enough to expose the small screw.
Step 6
Step 7
- Pull back gently on the right side of the bottom-right rubber enough to expose the small screw.
Pull back gently on the right side of the bottom-right rubber enough to expose the small screw.
Step 8
Step 9
- Insert the spudger into the space next to the right screw area.
- Gently pry open the battery case.
Insert the spudger into the space next to the right screw area.
Gently pry open the battery case.
Step 10
- Gently pry the battery cover off.
Gently pry the battery cover off.
Step 11
- Remove the battery cover.
- Locate the battery.
Remove the battery cover.
Locate the battery.
Step 12
- Lift the battery up using the spudger.
- The battery is taped down.
Lift the battery up using the spudger.
The battery is taped down.
Step 13
- Gently unplug the battery from the motherboard using the tweezers.
- Remove the battery.
Gently unplug the battery from the motherboard using the tweezers.
Remove the battery.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Michelle Bianco
Member since: 10/06/2022
217 Reputation
1 Guide authored
Badges:
3
Team
University of North Texas, Team 2-4, Raign Fall 2022
Member of University of North Texas, Team 2-4, Raign Fall 2022
UNT-RAIGN-F22S2G4
2 Members
1 Guide authored
