Belkin Netcam Hd Plus Front Casing Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

Suggest a time??

Sections

3

• Case
• 3 steps
• Microphone
• 2 steps
• Front Casing
• 1 step

Flags

0

• BackBelkin NetCam HD Plus

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Case               

• Use a wrench to loosen up the stand from the back in order to hold the NetCam more comfortably.

Use a wrench to loosen up the stand from the back in order to hold the NetCam more comfortably.

1024

Step 2

• Work a plastic opening tool into the seam and pry the face plate away from the back panel.

Work a plastic opening tool into the seam and pry the face plate away from the back panel.

Step 3

• Use pressure to separate the covers.
• When pulling the device apart, separate from the bottom up in order to avoid pulling the wiring at the top apart.

Use pressure to separate the covers.

When pulling the device apart, separate from the bottom up in order to avoid pulling the wiring at the top apart.

Step 4

              Microphone               

• Use tweezers to gently pull out the white attachment from the port.
• Use your fingers to pull out the white attachment from the tan port on the front of the board a little.

Use tweezers to gently pull out the white attachment from the port.

Use your fingers to pull out the white attachment from the tan port on the front of the board a little.

Step 5

• Use a pair of tweezers to wedge between the mic and the rubber guard to remove the mic from the front cover.
• If the rubber guard comes off with the mic just remove the guard from mic and place back on the front cover.

Use a pair of tweezers to wedge between the mic and the rubber guard to remove the mic from the front cover.

If the rubber guard comes off with the mic just remove the guard from mic and place back on the front cover.

Step 6

              Front Casing               

• Carefully use your fingers to gently pull out the white attachment from the tan colored part.

Carefully use your fingers to gently pull out the white attachment from the tan colored part.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Destinie DiazVerdejo                     

Member since: 10/04/2016

805 Reputation

                                      7 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges                           

Team

                       USF Tampa, Team 3-5, Sullivan Fall 2016                        

                                                  Member of USF Tampa, Team 3-5, Sullivan Fall 2016 



                    USFT-SULLIVAN-F16S3G5                     


                                            4 Members                     


                                            14 Guides authored