Difficulty

Moderate

Steps

6

Time Required

                          10 - 15 minutes

Sections

2

  • Lens Assembly
  • 3 steps
  • Front Lens
  • 3 steps

Flags

0

  • BackBell and Howell DNV16HDZ

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Lens Assembly
  • Remove the five 30mm Phillips #0 screws on the bottom of the camera.

Remove the five 30mm Phillips #0 screws on the bottom of the camera.

1024

Step 2

  • Use a plastic opening tool to disconnect the internal hinges that snaps the camera into place.
  • Using a plastic opening tool is important since a metal one will scratch or damage the thin plastic hinges that hold the camera together.

Use a plastic opening tool to disconnect the internal hinges that snaps the camera into place.

Using a plastic opening tool is important since a metal one will scratch or damage the thin plastic hinges that hold the camera together.

Step 3

  • It will still be connected by a plastic film. This can also be disconnected by pulling up the white part where it connects to the light circuit board.

It will still be connected by a plastic film. This can also be disconnected by pulling up the white part where it connects to the light circuit board.

Step 4

              Front Lens
  • Take out the two 20 mm screws that attach it to the shutter.

Take out the two 20 mm screws that attach it to the shutter.

Step 5

  • Remove the ten 30 mm Phillips #0 screws from the front lens.

Remove the ten 30 mm Phillips #0 screws from the front lens.

Step 6

  • Take the shutter screen parts out of the lens.
  • Now push out the front lens.
  • Slowly take out the shutter screen parts and lens, adding too much force will break them.

Take the shutter screen parts out of the lens.

Now push out the front lens.

Slowly take out the shutter screen parts and lens, adding too much force will break them.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Jerry Hadjah

Member since: 03/04/2016

525 Reputation

                                      5 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       UMass Dartmouth, Team 8-4, Botvin Spring 2016                        

                                                  Member of UMass Dartmouth, Team 8-4, Botvin Spring 2016 



                    UMASSD-BOTVIN-S16S8G4                     


                                            3 Members                     


                                            12 Guides authored