Difficulty

Moderate

Steps

4

Time Required

                          5 minutes

Sections

2

  • Lens Assembly
  • 3 steps
  • Hand Strap
  • 1 step

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackBell and Howell DNV16HDZ

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Lens Assembly
  • Remove the five 30mm Phillips #0 screws on the bottom of the camera.

Remove the five 30mm Phillips #0 screws on the bottom of the camera.

1024

Step 2

  • Use a plastic opening tool to disconnect the internal hinges that snaps the camera into place.
  • Using a plastic opening tool is important since a metal one will scratch or damage the thin plastic hinges that hold the camera together.

Use a plastic opening tool to disconnect the internal hinges that snaps the camera into place.

Using a plastic opening tool is important since a metal one will scratch or damage the thin plastic hinges that hold the camera together.

Step 3

  • It will still be connected by a plastic film. This can also be disconnected by pulling up the white part where it connects to the light circuit board.

It will still be connected by a plastic film. This can also be disconnected by pulling up the white part where it connects to the light circuit board.

Step 4

              Hand Strap
  • Pull the side with the hand strap upwards to disconnect it from the camcorder.
  • Unscrew the four 40 mm Phillips #0 screws.
  • Add the new hand strap now.

Pull the side with the hand strap upwards to disconnect it from the camcorder.

Unscrew the four 40 mm Phillips #0 screws.

Add the new hand strap now.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Jerry Hadjah

Member since: 03/04/2016

525 Reputation

                                      5 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       UMass Dartmouth, Team 8-4, Botvin Spring 2016                        

                                                  Member of UMass Dartmouth, Team 8-4, Botvin Spring 2016 



                    UMASSD-BOTVIN-S16S8G4                     


                                            3 Members                     


                                            12 Guides authored