Difficulty

Easy

Steps

11

Time Required

                          10 minutes

Sections

2

  • Outer Shell
  • 8 steps
  • Glass Door
  • 3 steps

Flags

0

  • BackBella 4-Slice Toaster Oven

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Outer Shell
  • Remove five 11.6 mm Phillips #2 screws from the rear of the device.

Remove five 11.6 mm Phillips #2 screws from the rear of the device.

1024

Step 2

  • Open the front glass door of the toaster oven.

Open the front glass door of the toaster oven.

Step 3

  • Locate retaining screw on the upper-middle portion of the door frame.

Locate retaining screw on the upper-middle portion of the door frame.

Step 4

  • Remove one 21.9 mm Phillips #2 retaining screw from upper-middle portion of door frame.

Remove one 21.9 mm Phillips #2 retaining screw from upper-middle portion of door frame.

Step 5

  • Flip toaster onto back panel with feet facing forward.

Flip toaster onto back panel with feet facing forward.

Step 6

  • Use spudger to pry the grey rubber inserts from the black plastic feet.

Use spudger to pry the grey rubber inserts from the black plastic feet.

Step 7

  • Remove four 13.7mm Phillips #2 screws from black plastic feet to separate the cover from the device.

Remove four 13.7mm Phillips #2 screws from black plastic feet to separate the cover from the device.

Step 8

  • Lift the black outer cover off of the toaster

Lift the black outer cover off of the toaster

Step 9

              Glass Door
  • Unhook the black coil springs from back of the toaster on both sides of the device.

Unhook the black coil springs from back of the toaster on both sides of the device.

Step 10

  • Use the black spudger to gently depress the hinge prongs on the bottom of the door.

Use the black spudger to gently depress the hinge prongs on the bottom of the door.

Step 11

  • Gently slide door away from the device, removing it from the device.

Gently slide door away from the device, removing it from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Pierce Hampton

Member since: 01/31/2019

558 Reputation

                                      4 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       Appalachian State University, Team S1-G4, Menagarishvili Spring 2019                        

                                                  Member of Appalachian State University, Team S1-G4, Menagarishvili Spring 2019 



                    APSU-MENAGARISHVILI-S19S1G4                     


                                            3 Members                     


                                            5 Guides authored