Difficulty

Easy

Steps

13

Time Required

                          5 minutes

Sections

2

  • Outer Shell
  • 8 steps
  • Heating Element
  • 5 steps

Flags

0

  • BackBella 4-Slice Toaster Oven

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Outer Shell
  • Remove five 11.6 mm Phillips #2 screws from the rear of the device.

Remove five 11.6 mm Phillips #2 screws from the rear of the device.

1024

Step 2

  • Open the front glass door of the toaster oven.

Open the front glass door of the toaster oven.

Step 3

  • Locate retaining screw on the upper-middle portion of the door frame.

Locate retaining screw on the upper-middle portion of the door frame.

Step 4

  • Remove one 21.9 mm Phillips #2 retaining screw from upper-middle portion of door frame.

Remove one 21.9 mm Phillips #2 retaining screw from upper-middle portion of door frame.

Step 5

  • Flip toaster onto back panel with feet facing forward.

Flip toaster onto back panel with feet facing forward.

Step 6

  • Use spudger to pry the grey rubber inserts from the black plastic feet.

Use spudger to pry the grey rubber inserts from the black plastic feet.

Step 7

  • Remove four 13.7mm Phillips #2 screws from black plastic feet to separate the cover from the device.

Remove four 13.7mm Phillips #2 screws from black plastic feet to separate the cover from the device.

Step 8

  • Lift the black outer cover off of the toaster

Lift the black outer cover off of the toaster

Step 9

              Heating Element
  • Remove the red wire from the heating element.

Remove the red wire from the heating element.

Step 10

  • Remove white wire from the opposite side of the heating element.

Remove white wire from the opposite side of the heating element.

Step 11

  • Use a metal spudger to unfold the tabs of metal that hold heating element in place.

Use a metal spudger to unfold the tabs of metal that hold heating element in place.

Step 12

  • Gently push the heating element from the side with the red wire to remove it from the toaster.

Gently push the heating element from the side with the red wire to remove it from the toaster.

Step 13

  • Repeat steps 1-4 for the second heating element.

Repeat steps 1-4 for the second heating element.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Pierce Hampton

Member since: 01/31/2019

558 Reputation

                                      4 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       Appalachian State University, Team S1-G4, Menagarishvili Spring 2019                        

                                                  Member of Appalachian State University, Team S1-G4, Menagarishvili Spring 2019 



                    APSU-MENAGARISHVILI-S19S1G4                     


                                            3 Members                     


                                            5 Guides authored