Difficulty
Easy
Steps
8
Time Required
5 minutes
Sections
1
- Outer Shell
- 8 steps
Flags
0
BackBella 4-Slice Toaster Oven
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Outer Shell
- Remove five 11.6 mm Phillips #2 screws from the rear of the device.
Remove five 11.6 mm Phillips #2 screws from the rear of the device.
1024
Step 2
- Open the front glass door of the toaster oven.
Open the front glass door of the toaster oven.
Step 3
- Locate retaining screw on the upper-middle portion of the door frame.
Locate retaining screw on the upper-middle portion of the door frame.
Step 4
- Remove one 21.9 mm Phillips #2 retaining screw from upper-middle portion of door frame.
Remove one 21.9 mm Phillips #2 retaining screw from upper-middle portion of door frame.
Step 5
- Flip toaster onto back panel with feet facing forward.
Flip toaster onto back panel with feet facing forward.
Step 6
- Use spudger to pry the grey rubber inserts from the black plastic feet.
Use spudger to pry the grey rubber inserts from the black plastic feet.
Step 7
- Remove four 13.7mm Phillips #2 screws from black plastic feet to separate the cover from the device.
Remove four 13.7mm Phillips #2 screws from black plastic feet to separate the cover from the device.
Step 8
- Lift the black outer cover off of the toaster
Lift the black outer cover off of the toaster
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Pierce Hampton
Member since: 01/31/2019
558 Reputation
4 Guides authored
Badges:
5
+2 more badges
Team
Appalachian State University, Team S1-G4, Menagarishvili Spring 2019
Member of Appalachian State University, Team S1-G4, Menagarishvili Spring 2019
APSU-MENAGARISHVILI-S19S1G4
3 Members
5 Guides authored
