Difficulty

Moderate

Steps

12

Time Required

Suggest a time??

Sections

2

  • Outer Shell
  • 8 steps
  • Timer
  • 4 steps

Flags

0

  • BackBella 4-Slice Toaster Oven

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Outer Shell
  • Remove five 11.6 mm Phillips #2 screws from the rear of the device.

Remove five 11.6 mm Phillips #2 screws from the rear of the device.

1024

Step 2

  • Open the front glass door of the toaster oven.

Open the front glass door of the toaster oven.

Step 3

  • Locate retaining screw on the upper-middle portion of the door frame.

Locate retaining screw on the upper-middle portion of the door frame.

Step 4

  • Remove one 21.9 mm Phillips #2 retaining screw from upper-middle portion of door frame.

Remove one 21.9 mm Phillips #2 retaining screw from upper-middle portion of door frame.

Step 5

  • Flip toaster onto back panel with feet facing forward.

Flip toaster onto back panel with feet facing forward.

Step 6

  • Use spudger to pry the grey rubber inserts from the black plastic feet.

Use spudger to pry the grey rubber inserts from the black plastic feet.

Step 7

  • Remove four 13.7mm Phillips #2 screws from black plastic feet to separate the cover from the device.

Remove four 13.7mm Phillips #2 screws from black plastic feet to separate the cover from the device.

Step 8

  • Lift the black outer cover off of the toaster

Lift the black outer cover off of the toaster

Step 9

              Timer
  • Using a plastic spudger, gently pry the black plastic timing dial away from the face of the toaster.

Using a plastic spudger, gently pry the black plastic timing dial away from the face of the toaster.

Step 10

  • Remove two 5.91 mm #2 Phillips screws which secure the timer to the toaster.

Remove two 5.91 mm #2 Phillips screws which secure the timer to the toaster.

Step 11

  • Inside the device, unplug the red and black wires from the top of the timer.

Inside the device, unplug the red and black wires from the top of the timer.

Step 12

  • Remove timer from device interior.

Remove timer from device interior.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Everett Dimenna

Member since: 01/31/2019

171 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       Appalachian State University, Team S1-G4, Menagarishvili Spring 2019                        

                                                  Member of Appalachian State University, Team S1-G4, Menagarishvili Spring 2019 



                    APSU-MENAGARISHVILI-S19S1G4                     


                                            3 Members                     


                                            5 Guides authored