Difficulty

Moderate

Steps

3

Time Required

Suggest a time??

Sections

1

  • BELT TIGHTENING
  • 3 steps

Flags

2

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackPROTOCENTRE 999

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Check that the belt is tight every fortnight (15 days of operation). For tightening the belt follow this procedure.

What you need

Video Overview

Step 1

              REMOVING OF BELT OUT SIDE
  • First you want to loose the screw from the belt holder with the help of a allen key by rotating it in anti clockwise direction as shown in figure.
  • Pull the belt out of the belt holder after loosing the screw.

First you want to loose the screw from the belt holder with the help of a allen key by rotating it in anti clockwise direction as shown in figure.

Pull the belt out of the belt holder after loosing the screw.

1024

Step 2

              FOR TIGHTENING THE BELT
  • Increase the number of belt teeth on the smaller side of the belt,
  • NOTE: Make sure that the belt moves through all the pulley and has not slipped of any of them
  • Insert and push the belt back into the belt holder.

Increase the number of belt teeth on the smaller side of the belt,

NOTE: Make sure that the belt moves through all the pulley and has not slipped of any of them

Insert and push the belt back into the belt holder.

Step 3

              TIGHTNING OF BELT SCREW
  • Rotate the screw in clockwise direction to tight the belt with the help of a allen key.
  • At the time of tightening the belt, hold the end of the belt part, for not slipping, while tightening.
  • Check the belt Stringing of the belt,whether it is tight or not.

Rotate the screw in clockwise direction to tight the belt with the help of a allen key.

At the time of tightening the belt, hold the end of the belt part, for not slipping, while tightening.

Check the belt Stringing of the belt,whether it is tight or not.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    abhishek j

Member since: 06/27/2017

1,169 Reputation

                                      11 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge