Difficulty
Very easy
Steps
4
Time Required
5 - 7 minutes
Sections
1
- Charging Base Battery
- 4 steps
Flags
0
BackBEM Mojo 2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Charging Base Battery
- Use the metal spudger to peel back the rubber from the bottom of the auxiliary charging base to reveal the screw.
Use the metal spudger to peel back the rubber from the bottom of the auxiliary charging base to reveal the screw.
1024
Step 2
- Use the screwdriver with the J0 bit attatched to detach all four 10 mm screws from the charging base.
Use the screwdriver with the J0 bit attatched to detach all four 10 mm screws from the charging base.
Step 3
- Pull the top cover off of the charging base to reveal the internal chip.
- Use the plastic opening tool to pry the battery from the top cover.
- Caution: Be careful when detaching battery from top cover as to not damage any of the wires attached to it.
Pull the top cover off of the charging base to reveal the internal chip.
Use the plastic opening tool to pry the battery from the top cover.
Caution: Be careful when detaching battery from top cover as to not damage any of the wires attached to it.
Step 4
- Use the tweezers to carefully detach the wires from the internal chip.
- Caution: Be careful to not damage the internal chip when removing the wires.
Use the tweezers to carefully detach the wires from the internal chip.
Caution: Be careful to not damage the internal chip when removing the wires.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Rachel Iacoboni
Member since: 01/30/2018
618 Reputation
5 Guides authored
Badges:
7
+4 more badges
Team
Baylor, Team S1-G1, Johnson Spring 2018
Member of Baylor, Team S1-G1, Johnson Spring 2018
BU-JOHNSON-S18S1G1
3 Members
5 Guides authored
