Difficulty

Moderate

Steps

5

Time Required

                          5 - 10 minutes

Sections

1

  • Speaker Battery
  • 5 steps

Flags

0

  • BackBEM Mojo 2

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Speaker Battery
  • Pull back the rubber corners to uncover the bottom screws.
  • Continue this process for all four 10 mm screws.

Pull back the rubber corners to uncover the bottom screws.

Continue this process for all four 10 mm screws.

1024

Step 2

  • Use the J0 screwdriver to remove all four 10mm screws from the bottom of the speaker.
  • Caution: It is important when using the screwdriver to not use excessive force as this may strip the screw and can damage the speaker itself.

Use the J0 screwdriver to remove all four 10mm screws from the bottom of the speaker.

Caution: It is important when using the screwdriver to not use excessive force as this may strip the screw and can damage the speaker itself.

Step 3

  • Remove the bottom cover of the speaker.
  • Caution: Be careful when removing the bottom cover of the speaker as there are wires that connect to the speaker itself that become exposed upon base removal.
  • Remove all of the wires from the speakers internal chip, utilizing the tweezers.
  • Caution: Be careful not to damage the chip.

Remove the bottom cover of the speaker.

Caution: Be careful when removing the bottom cover of the speaker as there are wires that connect to the speaker itself that become exposed upon base removal.

Remove all of the wires from the speakers internal chip, utilizing the tweezers.

Caution: Be careful not to damage the chip.

Step 4

  • Remove the speakers battery from its metal base, utilizing the plastic opening tool.

Remove the speakers battery from its metal base, utilizing the plastic opening tool.

Step 5

  • Remove the wires from the speakers battery using the tweezers or by gently removing them by lightly pinching.

Remove the wires from the speakers battery using the tweezers or by gently removing them by lightly pinching.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Rachel Iacoboni

Member since: 01/30/2018

618 Reputation

                                      5 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Baylor, Team S1-G1, Johnson Spring 2018                        

                                                  Member of Baylor, Team S1-G1, Johnson Spring 2018 



                    BU-JOHNSON-S18S1G1                     


                                            3 Members                     


                                            5 Guides authored