Bem Wireless Hl2739B Speaker Battery Replacement Repair Guide

Difficulty

Easy

Steps

5

Time Required

                          5 minutes            

Sections

1

• Speaker Battery
• 5 steps

Flags

0

• BackBem Wireless HL2739B

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Speaker Battery               

• Peel the rubber cover back from the corner of the speaker to reveal the screw.
• Repeat for the three remaining corners.

Peel the rubber cover back from the corner of the speaker to reveal the screw.

Repeat for the three remaining corners.

1024

Step 2

• Use the J1 bit attached to the screwdriver to remove the four 10mm screws from the bottom of the speaker.

Use the J1 bit attached to the screwdriver to remove the four 10mm screws from the bottom of the speaker.

Step 3

• Lift the bottom cover away from the rest of the speaker.
• There are wires connecting the battery and cover to the rest of the speaker. Be careful when removing the base cover.
• Using the tweezers, pull the wires from the speaker’s internal chip.
• Be careful not to damage the chip when you remove the wires.
• It will likely require soldering to reassemble the speaker after this step.

Lift the bottom cover away from the rest of the speaker.

There are wires connecting the battery and cover to the rest of the speaker. Be careful when removing the base cover.

Using the tweezers, pull the wires from the speaker’s internal chip.

Be careful not to damage the chip when you remove the wires.

It will likely require soldering to reassemble the speaker after this step.

Step 4

• Using a plastic opening tool, gently pry the battery from the metal base.

Using a plastic opening tool, gently pry the battery from the metal base.

Step 5

• Using tweezers, pull the wires from the metal base connection.

Using tweezers, pull the wires from the metal base connection.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    John Donovan                     

Member since: 02/28/2017

125 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       USF Tampa, Team S2-G4, Nance Spring 2017                        

                                                  Member of USF Tampa, Team S2-G4, Nance Spring 2017 



                    USFT-NANCE-S17S2G4                     


                                            4 Members                     


                                            5 Guides authored