Benq Ht1075 Projector Lamp Replacement Repair Guide

Difficulty

Easy

Steps

4

Time Required

                          5 minutes            

Sections

1

• Lamp
• 4 steps

Flags

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

• BackBenQ HT1075 Projector

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Lamp               

• Loosen the 2.5 mm Phillips #1 screw that holds the top assembly in place using a Philips #1 (PH1) screwdriver. This will enable you to lift and slide off the top cover.
• Fully remove the top cover in order to get to the lamp housing.

Loosen the 2.5 mm Phillips #1 screw that holds the top assembly in place using a Philips #1 (PH1) screwdriver. This will enable you to lift and slide off the top cover.

Fully remove the top cover in order to get to the lamp housing.

1024

Step 2

• Carefully peel off the adhesive film covering the lamp housing.

Carefully peel off the adhesive film covering the lamp housing.

Step 3

• Using a Phillips #1 (PH1) screwdriver, loosen and remove the single 2.5 mm Phillips #1 screw that secures the lamp housing to the projector.

Using a Phillips #1 (PH1) screwdriver, loosen and remove the single 2.5 mm Phillips #1 screw that secures the lamp housing to the projector.

Step 4

• Remove the lamp from the projector by pulling on the lamp handle.
• Apply more force on the side opposite of the newly removed screw as you pull the lamp out.

Remove the lamp from the projector by pulling on the lamp handle.

Apply more force on the side opposite of the newly removed screw as you pull the lamp out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Gabriela Remulla                     

Member since: 09/26/2017

855 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       Cal Poly, Team S6-G1, Banghart Fall 2017                        

                                                  Member of Cal Poly, Team S6-G1, Banghart Fall 2017 



                    CPSU-BANGHART-F17S6G1                     


                                            5 Members                     


                                            5 Guides authored