Bidet Sprayer Hose Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          10 - 20 minutes

Sections

Spray Hose
7 steps

Flags

BackPlumbing
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

This is guide will highlight the steps required to safely uninstall the bidet from the toilet and then replacing the hose from the sprayer.

Step 1

              Spray Hose

Turn off the main water valve under the toilet.
Rotate it clockwise until it is completely shut.

Turn off the main water valve under the toilet.

Rotate it clockwise until it is completely shut.

1024

Step 2

Push this valve downwards to shut off the bidet sprayer.

Push this valve downwards to shut off the bidet sprayer.

Step 3

Disconnect the tee connector from the water supply by turning the knob counterclockwise.
Turn the knob counterclockwise to detach the tee connector from the toilet.
You may also flush out any water inside the bidet by straightening the hose and any water remaining will pour out of the end of the hose.

Disconnect the tee connector from the water supply by turning the knob counterclockwise.

Turn the knob counterclockwise to detach the tee connector from the toilet.

You may also flush out any water inside the bidet by straightening the hose and any water remaining will pour out of the end of the hose.

Step 4

Unscrew the sprayer from the hose.
Unscrew the hose from the tee connector.

Unscrew the sprayer from the hose.

Unscrew the hose from the tee connector.

Step 5

Attach the new/replacement hose with the tee connector. The valve should be on the opposite side.
Attach the hose to the sprayer.

Attach the new/replacement hose with the tee connector. The valve should be on the opposite side.

Attach the hose to the sprayer.

Step 6

Start by reattaching the tee connector to the toilet. Turn the knob clockwise.
Connect the tee connector to the main water supply line. Turn the knob counterclockwise.
Make sure the bidet is placed well enough to not overextend the hose.

Start by reattaching the tee connector to the toilet. Turn the knob clockwise.

Connect the tee connector to the main water supply line. Turn the knob counterclockwise.

Make sure the bidet is placed well enough to not overextend the hose.

Step 7

Push the valve upwards to turn on the bidet.
Turn the main water valve counterclockwise to turn on the toilet water supply.
Test out the new hose by using the sprayer and checking for any leaks.

Push the valve upwards to turn on the bidet.

Turn the main water valve counterclockwise to turn on the toilet water supply.

Test out the new hose by using the sprayer and checking for any leaks.

To prevent further leaks, rest the device in a manner so that the hose is not stretched extensively or placed in a twisted position.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor

                    tahmid.razzak

Member since: 09/21/2020

145 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       York University, Team S1-G22, O'Regan Summer 2021                        

                                                  Member of York University, Team S1-G22, O'Regan Summer 2021 



                    YORK-O'REGAN-SU21S1G22                     


                                            1 Member                     


                                            1 Guide authored

Introduction#

Team#

Introduction

Team