Difficulty
Moderate
Steps
4
Time Required
Suggest a time??
Sections
2
- Spark Plug Disconnection
- 1 step
- Rear Guard
- 3 steps
Flags
0
BackBilly Goat Brush Cutter BC2600HHF (2015)
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Spark Plug Disconnection
- Grab the plastic housing at the end of the spark plug wire.
- Pull firmly to disconnect the wire from the spark plug.
Grab the plastic housing at the end of the spark plug wire.
Pull firmly to disconnect the wire from the spark plug.
1024
Step 2
Rear Guard
- Use a 1/2" socket or wrench to remove the two 26 mm bolts securing the rear guard to the back end of the brush cutter.
Use a 1/2" socket or wrench to remove the two 26 mm bolts securing the rear guard to the back end of the brush cutter.
Step 3
- The brush cutter is heavy—get help before attempting to lift it.
- If you choose to tip the brush cutter onto its side, first drain the oil and gas.
- Raise and support the back end of the brush cutter—or tip it carefully onto its side—in order to access the bottom cover.
The brush cutter is heavy—get help before attempting to lift it.
If you choose to tip the brush cutter onto its side, first drain the oil and gas.
Raise and support the back end of the brush cutter—or tip it carefully onto its side—in order to access the bottom cover.
Step 4
- Use a 3/8” socket or wrench to remove the four 21 mm bolts securing the rear guard.
- Remove the guard.
Use a 3/8” socket or wrench to remove the four 21 mm bolts securing the rear guard.
Remove the guard.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
Jeff Suovanen
Member since: 08/06/2013
401,023 Reputation
261 Guides authored
Badges:
48
+45 more badges
Team
iFixit
Member of iFixit
Community
141 Members
15,769 Guides authored