Bissell Air180 Control Buttons Replacement Repair Guide

Difficulty

Moderate

Steps

8

Time Required

                          5 minutes            

Sections

3

• Air Filter
• 3 steps
• Power Supply
• 2 steps
• Control Buttons
• 3 steps

Flags

0

• BackBissell Air180

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Air Filter               

• Squeeze the clip on the back panel of the bottom housing and pull the panel away from the housing, exposing the air filter.

Squeeze the clip on the back panel of the bottom housing and pull the panel away from the housing, exposing the air filter.

1024

Step 2

• Grab the sides of the filter and pull it up.

Grab the sides of the filter and pull it up.

Step 3

• Pull the filter away from the bottom housing, removing it from the rest of the device.

Pull the filter away from the bottom housing, removing it from the rest of the device.

Step 4

              Power Supply               

• Remove the four 18mm Phillips #1 screws connecting the bottom housing to the rest of the device.

Remove the four 18mm Phillips #1 screws connecting the bottom housing to the rest of the device.

Step 5

• Pull the bottom housing away from the rest of the device separating the power supply.
• Unplug the red cord to fully disconnect the power supply from the fan and motherboard housing.

Pull the bottom housing away from the rest of the device separating the power supply.

Unplug the red cord to fully disconnect the power supply from the fan and motherboard housing.

Step 6

              Control Buttons               

• Pry off the top vent, separating it from the fan and motherboard housing.

Pry off the top vent, separating it from the fan and motherboard housing.

Step 7

• Pry the button control panel up and away from the rest of the device using a spudger.

Pry the button control panel up and away from the rest of the device using a spudger.

Step 8

• Pull the wire connecting the button controls to the fan housing to fully disconnect the button controls from the device.

Pull the wire connecting the button controls to the fan housing to fully disconnect the button controls from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Aleah Ramos                     

Member since: 10/26/2022

533 Reputation

                                      5 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       UMass Dartmouth, Team 3-4, Botvin Fall 2022                        

                                                  Member of UMass Dartmouth, Team 3-4, Botvin Fall 2022 



                    UMASSD-BOTVIN-F22S3G4                     


                                            4 Members                     


                                            5 Guides authored