Difficulty

Easy

Steps

8

Time Required

                          10 minutes

Sections

2

  • Flex Hose with Handle
  • 3 steps
  • Filters
  • 5 steps

Flags

0

  • BackBissell OptiClean Cyclonic

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Flex Hose with Handle
  • Grab hold of both the flex hose handle and the extension wand.
  • Pull straight out to detach the handle from the extension wand.

Grab hold of both the flex hose handle and the extension wand.

Pull straight out to detach the handle from the extension wand.

1024

Step 2

  • Locate the lock clip on the other end of the flex hose.

Locate the lock clip on the other end of the flex hose.

Step 3

  • Hold down the lock clip to unlock the flex hose from the vacuum.
  • Remove the flex hose from the vacuum.

Hold down the lock clip to unlock the flex hose from the vacuum.

Remove the flex hose from the vacuum.

Step 4

              Filters
  • After removing hose, place vacuum on back and unclip the top compartment.
  • Open the compartment.
  • Pull the dirt collection box out of the vacuum.

After removing hose, place vacuum on back and unclip the top compartment.

Open the compartment.

Pull the dirt collection box out of the vacuum.

Step 5

  • Place dirt collection box to the side.
  • Locate the Pre-Motor Filter.
  • Pull the filter out by grabbing the pull tab on top.

Place dirt collection box to the side.

Locate the Pre-Motor Filter.

Pull the filter out by grabbing the pull tab on top.

Step 6

  • Turn vacuum around and locate the filter cover on the bottom.
  • Place fingers in the opening and pull off the filter cover.
  • Place fingers on each tab on the Post-Motor HEPA Media Filter and pull out.

Turn vacuum around and locate the filter cover on the bottom.

Place fingers in the opening and pull off the filter cover.

Place fingers on each tab on the Post-Motor HEPA Media Filter and pull out.

Step 7

  • Take filter out to clean or replace.
  • To clean Dirt Collection Box, unlatch lid and take off.

Take filter out to clean or replace.

To clean Dirt Collection Box, unlatch lid and take off.

Step 8

  • Flip Dirt Collection Box over and locate the push tab.
  • Push the Dirt Cup HEPA Media Filter up to take it off.
  • Picture 3 Shows all the filters taken out of the vacuum.

Flip Dirt Collection Box over and locate the push tab.

Push the Dirt Cup HEPA Media Filter up to take it off.

Picture 3 Shows all the filters taken out of the vacuum.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Austin Marshall

Member since: 01/18/2018

121 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       Cal Poly, Team S12-G1, Banghart Winter 2018                        

                                                  Member of Cal Poly, Team S12-G1, Banghart Winter 2018 



                    CPSU-BANGHART-W18S12G1                     


                                            5 Members                     


                                            5 Guides authored