Bissell Powerlifter Brush Belt Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          10 - 15 minutes

Sections

Brush Belt
4 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

BackBissell PowerLifter
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Brush Belt

Here is the Bissell vacuum cleaner. The front brushes did no longer turn.
Unplug the vacuum and turn it over so the bottom of the vacuum can be accessed
There are a total of 7 Phillips head screws that need to be removed.
One of these screws is behind the height adjustment plate. It must be removed to gain access.

Here is the Bissell vacuum cleaner. The front brushes did no longer turn.

Unplug the vacuum and turn it over so the bottom of the vacuum can be accessed

There are a total of 7 Phillips head screws that need to be removed.

One of these screws is behind the height adjustment plate. It must be removed to gain access.

1024

Step 2

Use a flat tip screwdriver to push the tab from the height adjustment plate inwards to the plate to free it from the vacuum cleaner. Procedure is typical for both sides.
Remove the height adjustment plate.
All Phillips head screws can now be removed.

Use a flat tip screwdriver to push the tab from the height adjustment plate inwards to the plate to free it from the vacuum cleaner. Procedure is typical for both sides.

Remove the height adjustment plate.

All Phillips head screws can now be removed.

Step 3

Turn the vacuum around and move the top cover straight up
Here is the brush assembly with the belt on the right. This belt was definitely broken.
Remove the brush by pulling it straight out.

Turn the vacuum around and move the top cover straight up

Here is the brush assembly with the belt on the right. This belt was definitely broken.

Remove the brush by pulling it straight out.

Step 4

next place the new belt on the motor drive first, then the brush.

next place the new belt on the motor drive first, then the brush.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor

                    oldturkey03

Member since: 09/29/2010

722,341 Reputation

                                      109 Guides authored                  



                       Badges:
                       53







                                                        +50 more badges

Team

                       Global Fixers                        

                                                  Member of Global Fixers 



                    Community                     


                                            22 Members                     


                                            240 Guides authored

Member-Contributed Guide#

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Member-Contributed Guide

Introduction

What you need

Team