Difficulty
Easy
Steps
6
Time Required
15 - 30 minutes
Sections
1
- Belt
- 6 steps
Flags
0
BackBissell Vacuum
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Before starting this guide, make sure to have the new belt, and to turn off and unplug your vacuum.
What you need
Step 1
Belt
- Using your Phillips #2 screwdriver, remove the six 17.5 mm screws on the front panel that holds the brush roll in place.
Using your Phillips #2 screwdriver, remove the six 17.5 mm screws on the front panel that holds the brush roll in place.
1024
Step 2
- Pull the front panel to remove it and access the brush roll and the broken belt.
Pull the front panel to remove it and access the brush roll and the broken belt.
Step 3
- Remove the broken belt.
- Hold the brush roll on both ends and pull it outward to remove it.
Remove the broken belt.
Hold the brush roll on both ends and pull it outward to remove it.
Step 4
- Put the new belt on the metal that makes the belt turn. It is located close to the rear tire.
Put the new belt on the metal that makes the belt turn. It is located close to the rear tire.
Step 5
- Put the new belt on the brush roll where there is a black spot.
Put the new belt on the brush roll where there is a black spot.
Step 6
- Pull the brush roll upward and align it in its original spot.
- This may take some force.
Pull the brush roll upward and align it in its original spot.
This may take some force.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 1 other contributor
Kouassi Kouassi
Member since: 07/23/2020
160 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
UW Tacoma, Team S1-G6, Cardinal Summer 2020
Member of UW Tacoma, Team S1-G6, Cardinal Summer 2020
UWT-CARDINAL-SU20S1G6
1 Member
1 Guide authored
