Featured
Featured Guide
Difficulty
Easy
Steps
7
Time Required
15 - 30 minutes
Sections
1
- Battery
- 7 steps
Flags
2
Featured Guide
This guide has been found to be exceptionally cool by the iFixit staff.
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackBlack and Decker 9074 Type 4
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Black & Decker 9074 type 4 screwdriver that no longer holds a charge.
- Main pieces to work on for disassembly
- Remove the clip that holds the transmission to the body. Insert a 6mm (1/4") flat tip screwdriver underneath the clip, gently move clip upward.
Black & Decker 9074 type 4 screwdriver that no longer holds a charge.
Main pieces to work on for disassembly
Remove the clip that holds the transmission to the body. Insert a 6mm (1/4") flat tip screwdriver underneath the clip, gently move clip upward.
1024
Step 2
- Once the clip is removed the transmission can be pulled of the body.
- Move transmission away from body
- Planetary gears inside the transmission look clean and complete.
Once the clip is removed the transmission can be pulled of the body.
Move transmission away from body
Planetary gears inside the transmission look clean and complete.
Step 3
- Remove plastic washer that is situated between the transmission and the body.
- These are the three screws that need to be removed.
- Use a Phillips #1 screwdriver on those three screws
Remove plastic washer that is situated between the transmission and the body.
These are the three screws that need to be removed.
Use a Phillips #1 screwdriver on those three screws
Step 4
- Three Phillips screws 7/8" long removed.
- Separate the two body halves.
- Battery, charging port and motor are clearly seen. These are just laid into the bottom half and can be easily removed.
Three Phillips screws 7/8" long removed.
Separate the two body halves.
Battery, charging port and motor are clearly seen. These are just laid into the bottom half and can be easily removed.
Step 5
- The motor is held to the contact carrier by two elongated contacts. Clearly visible is a charging Diode as we as plenty of corrosion on the positive contact.
- Remove motor by simply pulling it away from the contact carrier
- View of the wiring with motor removed.
The motor is held to the contact carrier by two elongated contacts. Clearly visible is a charging Diode as we as plenty of corrosion on the positive contact.
Remove motor by simply pulling it away from the contact carrier
View of the wiring with motor removed.
Step 6
- Top view of the wiring.
- Use small needle nose pliers to remove cable connector from positive contact of the battery.
- Positive wiring removed from battery.
Top view of the wiring.
Use small needle nose pliers to remove cable connector from positive contact of the battery.
Positive wiring removed from battery.
Step 7
- Remove the negative (bottom) wire from battery. Gently pull it off the cable connector. Hold the wire close to the connector for removal.
- All wiring separated from the battery. It is now ready to be replaced.
- These are all the parts disassembled for this job.
Remove the negative (bottom) wire from battery. Gently pull it off the cable connector. Hold the wire close to the connector for removal.
All wiring separated from the battery. It is now ready to be replaced.
These are all the parts disassembled for this job.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
8 other people completed this guide.
Author
with 3 other contributors
oldturkey03
Member since: 09/29/2010
722,317 Reputation
109 Guides authored
Badges:
53
+50 more badges
Team
Global Fixers
Member of Global Fixers
Community
22 Members
240 Guides authored
Biller koby - Oct 15, 2022
Reply
thanks. It is also useful for old TYPE 1 model 9018. But where can you find the battery?
oldturkey03 - Oct 15, 2022
Biller koby of course like so many other things, the battery is no longer available. But we have a fix for that as well. Check this guide Repairing Black and Decker 9074 Screwdriver Battery
