Difficulty

Difficult

Steps

4

Time Required

                          30 minutes

Sections

1

  • Motor
  • 4 steps

Flags

0

  • BackBlack and Decker BDH9600CHV

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

If the device doesn’t work after this, simply take the motor and insert the prongs on the opposite sides that they are inserted into on the circuit board.

What you need

Step 1

              Motor
  • To remove the filter and housing, press the green button labeled “Filter”.

To remove the filter and housing, press the green button labeled “Filter”.

1024

Step 2

  • Unscrew and remove all 5 screws using the Phillips 0 screw bit. Each screw is 17.5 mm long.

Unscrew and remove all 5 screws using the Phillips 0 screw bit. Each screw is 17.5 mm long.

Step 3

  • Pull the housing apart
  • When you pull apart the housing pieces could fall out. Be sure to keep track of them.
  • Remove the motor unit from the housing
  • Note that the black disk needs to be firmly pulled it will resist, but can be pulled directly off of the pin if it is pulled hard enough.

Pull the housing apart

When you pull apart the housing pieces could fall out. Be sure to keep track of them.

Remove the motor unit from the housing

Note that the black disk needs to be firmly pulled it will resist, but can be pulled directly off of the pin if it is pulled hard enough.

Step 4

  • Remove the motor from the circuit board.
  • The motor makes contact with the board at 2 points. These may be bent or distorted. Straighten them with a pair of needle nose pliers in order to remove.

Remove the motor from the circuit board.

The motor makes contact with the board at 2 points. These may be bent or distorted. Straighten them with a pair of needle nose pliers in order to remove.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 


                    Ivette Muzquiz

Member since: 11/06/2017

349 Reputation

                                      3 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       IUPUI, Team S1-G4, Harley Fall 2017                        

                                                  Member of IUPUI, Team S1-G4, Harley Fall 2017 



                    IUPUI-HARLEY-F17S1G4                     


                                            3 Members                     


                                            3 Guides authored