Black And Decker Bdh9600Chv Power Switch Replacement Repair Guide

Difficulty

Easy

Steps

4

Time Required

                          15 minutes            

Sections

1

• Power Switch
• 4 steps

Flags

0

• BackBlack and Decker BDH9600CHV

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

One thing to be aware of would be that the screws are deep within the outside of the housing so an extender could be needed to reach the screws

What you need

Step 1

              Power Switch               

• To remove the filter and housing, press the green button labeled “Filter”.

To remove the filter and housing, press the green button labeled “Filter”.

1024

Step 2

• Unscrew and remove all 5 screws using the Phillips 0 screw bit. Each screw is 17.5 mm long.

Unscrew and remove all 5 screws using the Phillips 0 screw bit. Each screw is 17.5 mm long.

Step 3

• Pull the housing apart.
• When you pull the housing apart, pieces may fall out. Be sure to track of the parts and where they go.
• Remove the switch by pulling it out.

Pull the housing apart.

When you pull the housing apart, pieces may fall out. Be sure to track of the parts and where they go.

Remove the switch by pulling it out.

Step 4

• Replace the new switch by sliding the replacement switch onto the top of the switch mechanism located on the motor.

Replace the new switch by sliding the replacement switch onto the top of the switch mechanism located on the motor.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 4 other contributors 

                    Ivette Muzquiz                     

Member since: 11/06/2017

349 Reputation

                                      3 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       IUPUI, Team S1-G4, Harley Fall 2017                        

                                                  Member of IUPUI, Team S1-G4, Harley Fall 2017 



                    IUPUI-HARLEY-F17S1G4                     


                                            3 Members                     


                                            3 Guides authored                     

Fernando Palacios - Jul 4, 2022

Reply

My switch with up & down button box like