Difficulty
Moderate
Steps
6
Time Required
20 minutes
Sections
1
- Motor Compartment
- 6 steps
Flags
0
BackBlack and Decker JE2200B
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Motor Compartment
- To replace the motor compartment, first follow the Disassembly Guide here
To replace the motor compartment, first follow the Disassembly Guide here
1024
Step 2
- Use the 2.5 mm Flathead adapter to remove the 13.5 mm screws from the bottom of the juicer. The screw head diameter is 5.2 mm.
Use the 2.5 mm Flathead adapter to remove the 13.5 mm screws from the bottom of the juicer. The screw head diameter is 5.2 mm.
Step 3
- Carefully remove the bottom off the rest of the machine.
Carefully remove the bottom off the rest of the machine.
Step 4
- Lay the juicer horizontally and roll the top shaft cover until it comes off.
Lay the juicer horizontally and roll the top shaft cover until it comes off.
Step 5
- Unscrew the 19.1 mm screws inside the juicer holding the motor compartment attached to the juicer. Use the 2.5 mm Flathead adapter as the screw driver. The diameter of the screw head is 7.1 mm.
Unscrew the 19.1 mm screws inside the juicer holding the motor compartment attached to the juicer. Use the 2.5 mm Flathead adapter as the screw driver. The diameter of the screw head is 7.1 mm.
Step 6
- Remove the motor compartment from the juicer and it is ready to be replaced.
Remove the motor compartment from the juicer and it is ready to be replaced.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
Author
with 3 other contributors
Bhavika Shah
Member since: 08/27/2015
331 Reputation
2 Guides authored
Badges:
15
+12 more badges
Team
USF Tampa, Team 5-5, Blackwell Fall 2015
Member of USF Tampa, Team 5-5, Blackwell Fall 2015
USFT-BLACKWELL-F15S5G5
3 Members
6 Guides authored