Difficulty
Moderate
Steps
3
Time Required
5 minutes
Sections
2
- Housing Disassembly
- 2 steps
- Blade Holder
- 1 step
Flags
0
BackBlack and Decker JS660
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Housing Disassembly
- Remove the nine torx 15.875mm screws on the front of the jigsaw using a T-15 torx screwdriver.
Remove the nine torx 15.875mm screws on the front of the jigsaw using a T-15 torx screwdriver.
1024
Step 2
- By separating the two housing halves, carefully remove the top plate.
By separating the two housing halves, carefully remove the top plate.
Step 3
Blade Holder
- Being careful to keep all parts together, grab the entire assembly and pull it directly out of the saw.
Being careful to keep all parts together, grab the entire assembly and pull it directly out of the saw.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
matt murray
Member since: 01/27/2017
664 Reputation
6 Guides authored
Badges:
11
+8 more badges
Team
Cal Poly, Team 22-9, Maness Winter 2017
Member of Cal Poly, Team 22-9, Maness Winter 2017
CPSU-MANESS-W17S22G9
4 Members
7 Guides authored
Delores Torres - Sep 28, 2022
Reply
Why dose it keep throw the blade off
