Difficulty
Moderate
Steps
5
Time Required
7 minutes
Sections
2
- Housing Disassembly
- 2 steps
- Power Cord
- 3 steps
Flags
0
BackBlack and Decker JS660
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Housing Disassembly
- Remove the nine torx 15.875mm screws on the front of the jigsaw using a T-15 torx screwdriver.
Remove the nine torx 15.875mm screws on the front of the jigsaw using a T-15 torx screwdriver.
1024
Step 2
- By separating the two housing halves, carefully remove the top plate.
By separating the two housing halves, carefully remove the top plate.
Step 3
Power Cord
- Remove the two 12.7mm phillips head screws holding the power cord in place with a PH2 Phillips head screwdriver.
Remove the two 12.7mm phillips head screws holding the power cord in place with a PH2 Phillips head screwdriver.
Step 4
- Remove the two 6.35mm flat head screws on the trigger with a 2.5 flat head screwdriver to disconnect the white and black cords.
Remove the two 6.35mm flat head screws on the trigger with a 2.5 flat head screwdriver to disconnect the white and black cords.
Step 5
- Gently remove the black and white cord from the trigger assembly.
Gently remove the black and white cord from the trigger assembly.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
matt murray
Member since: 01/27/2017
664 Reputation
6 Guides authored
Badges:
11
+8 more badges
Team
Cal Poly, Team 22-9, Maness Winter 2017
Member of Cal Poly, Team 22-9, Maness Winter 2017
CPSU-MANESS-W17S22G9
4 Members
7 Guides authored
