Difficulty
Moderate
Steps
4
Time Required
3 minutes
Sections
2
- Housing Disassembly
- 2 steps
- Shoe Plate
- 2 steps
Flags
0
BackBlack and Decker JS660
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Housing Disassembly
- Remove the nine torx 15.875mm screws on the front of the jigsaw using a T-15 torx screwdriver.
Remove the nine torx 15.875mm screws on the front of the jigsaw using a T-15 torx screwdriver.
1024
Step 2
- By separating the two housing halves, carefully remove the top plate.
By separating the two housing halves, carefully remove the top plate.
Step 3
Shoe Plate
- Remove the 6.3mm hex screw on the left with a H.30 hex screwdriver.
- Remove the reverse threaded 6.9mm black hex screw on the right with a H.40 hex screwdriver.
Remove the 6.3mm hex screw on the left with a H.30 hex screwdriver.
Remove the reverse threaded 6.9mm black hex screw on the right with a H.40 hex screwdriver.
Step 4
- Simply remove the shoe plate by pulling it down and out.
Simply remove the shoe plate by pulling it down and out.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 4 other contributors
matt murray
Member since: 01/27/2017
664 Reputation
6 Guides authored
Badges:
11
+8 more badges
Team
Cal Poly, Team 22-9, Maness Winter 2017
Member of Cal Poly, Team 22-9, Maness Winter 2017
CPSU-MANESS-W17S22G9
4 Members
7 Guides authored
Rick Weaver - Jul 6, 2017
Reply
Thank you! Looked all over for this.
