Difficulty

Moderate

Steps

6

Time Required

Suggest a time??

Sections

2

  • Nozzle, Filter, and Catch Bowl
  • 2 steps
  • Motor
  • 4 steps

Flags

3

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Better Introduction

Improve this guide by completing or revising its introduction.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackBlack and Decker PHV1810 Hand Vac

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Nozzle, Filter, and Catch Bowl
  • To take off the nozzle, filter, and catch bowl first start off by pushing in the button identified with a red square and twist that part of the device toward the handle portion of the vacuum and it should click and pop off the chassis.

To take off the nozzle, filter, and catch bowl first start off by pushing in the button identified with a red square and twist that part of the device toward the handle portion of the vacuum and it should click and pop off the chassis.

1024

Step 2

  • Once the nozzle, filter and dust bowl have been removed each part can be removed from the nozzle section of the device.

Once the nozzle, filter and dust bowl have been removed each part can be removed from the nozzle section of the device.

Step 3

              Motor
  • Remove the three screws.

Remove the three screws.

Step 4

  • Flip the hand vac over and remove two screws.

Flip the hand vac over and remove two screws.

Step 5

  • Once you have successfully unscrewed the five screws holding the cover on you should be able to take the cover off.
  • Remove the L-shaped plastic hook.
  • Once the L shaped hook has been removed the motor will easily fall out of place.

Once you have successfully unscrewed the five screws holding the cover on you should be able to take the cover off.

Remove the L-shaped plastic hook.

Once the L shaped hook has been removed the motor will easily fall out of place.

Step 6

  • Once the motor has been removed from its home the two wires that are giving it power can easily be removed by pulling on them carefully.
  • This will then allow for you to replace the motor.

Once the motor has been removed from its home the two wires that are giving it power can easily be removed by pulling on them carefully.

This will then allow for you to replace the motor.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Cade Bennett

Member since: 09/24/2018

209 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       The Citadel Military College of South Carolina, Team S2-G4, Eggleston Fall 2018                        

                                                  Member of The Citadel Military College of South Carolina, Team S2-G4, Eggleston Fall 2018 



                    CMCSC-EGGLESTON-F18S2G4                     


                                            3 Members                     


                                            4 Guides authored