Difficulty
Easy
Steps
2
Time Required
10 - 20 minutes
Sections
1
- Black and Decker Pivot Plus PD600 Pivot Button Disassembly
- 2 steps
Flags
0
BackBlack and Decker Pivot Plus PD600
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
The pivot button may need to be removed and checked for contaminants if problems such as jamming of the button occur.
No special skills or tools are required for this disassembly.
What you need
Step 1
Black and Decker Pivot Plus PD600 Pivot Button Disassembly
- Locate the pivot button screw labeled with a lock symbol.
- Remove the screw with a Phillips #1 screwdriver.
Locate the pivot button screw labeled with a lock symbol.
Remove the screw with a Phillips #1 screwdriver.
1024
Step 2
- Set the screw to the side.
- Remove both sides of the button from the screwdriver.
- You will be left with three pieces: a black piece with a lock on the front, a circular orange piece, and a spring.
Set the screw to the side.
Remove both sides of the button from the screwdriver.
You will be left with three pieces: a black piece with a lock on the front, a circular orange piece, and a spring.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 10 other contributors
Ryan Angelich
Member since: 05/13/2013
101 Reputation
1 Guide authored
Badges:
2
Team
Cal Poly, Team 4-15, Maness Spring 2013
Member of Cal Poly, Team 4-15, Maness Spring 2013
CPSU-MANESS-S13S4G15
5 Members
6 Guides authored
