Difficulty
Moderate
Steps
9
Time Required
Suggest a time??
Sections
1
- Knobs
- 9 steps
Flags
0
BackBlack and Decker Toast R Oven TRO200
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Knobs
- Make sure that the toaster is unplugged before you begin.
- Turn the toaster upside down and remove the two Phillips #4 1 cm screws attached to the side panels.
Make sure that the toaster is unplugged before you begin.
Turn the toaster upside down and remove the two Phillips #4 1 cm screws attached to the side panels.
1024
Step 2
- Pull down and out to remove side panels from the unit
- Repeat for the other side.
Pull down and out to remove side panels from the unit
Repeat for the other side.
Step 3
- Remove the bottom vent.
- This should come off fairly easy.
Remove the bottom vent.
This should come off fairly easy.
Step 4
- Remove the two Phillips #4 1 cm screws that connect the bottom panel to the unit.
Remove the two Phillips #4 1 cm screws that connect the bottom panel to the unit.
Step 5
- Remove the crumb tray (bottom metal panel) from the toaster unit.
Remove the crumb tray (bottom metal panel) from the toaster unit.
Step 6
- Remove the aluminum strip on the bottom of the unit.
Remove the aluminum strip on the bottom of the unit.
Step 7
- Remove knobs by pulling up on them.
Remove knobs by pulling up on them.
Step 8
- Unhook the bottom of the display panel from the toaster unit.
- It will be a little tough to pry off, but don’t be afraid to be forceful.
Unhook the bottom of the display panel from the toaster unit.
It will be a little tough to pry off, but don’t be afraid to be forceful.
Step 9
- Begin to detach the back panel from the toaster unit and unhook the rest of the display panel.
- This will also be a little tough to get off, but don’t be afraid to be forceful.
Begin to detach the back panel from the toaster unit and unhook the rest of the display panel.
This will also be a little tough to get off, but don’t be afraid to be forceful.
To reassemble your toaster, follow these directions in reverse.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 7 other contributors
Jonathan
Member since: 09/18/2012
281 Reputation
5 Guides authored
Badges:
9
+6 more badges
Team
Cal Poly, Team 2-10, Propen Fall 2012
Member of Cal Poly, Team 2-10, Propen Fall 2012
CPSU-PROPEN-F12S2G10
4 Members
5 Guides authored
