Black And Decker Toast R Oven Tro405 Dissasembly Repair Guide

Difficulty

Easy

Steps

Time Required

                          30 - 45 minutes

Sections

Black and Decker Toast R Oven TRO405 Dissasembly
13 steps

Flags

BackBlack and Decker Toast R Oven TRO405
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Black and Decker Toast R Oven TRO405 Dissasembly

Make sure the toaster oven is unplugged before beginning.
You may want to clean out the worst of the spills in the toaster oven before beginning.
Open the toaster oven door and remove the shelf.

Make sure the toaster oven is unplugged before beginning.

You may want to clean out the worst of the spills in the toaster oven before beginning.

Open the toaster oven door and remove the shelf.

1024

Step 2

Turn the toaster upside down so that you are looking at the bottom of the toaster oven.
Use a 1/4 inch nut driver to remove the 15.7 mm screw on the dark brown plastic wire cover.
Take off the wire cover.

Turn the toaster upside down so that you are looking at the bottom of the toaster oven.

Use a 1/4 inch nut driver to remove the 15.7 mm screw on the dark brown plastic wire cover.

Take off the wire cover.

Step 3

Still using the 1/4 inch nut driver, remove the pointy 19 mm screw on each white plastic side panel.

Still using the 1/4 inch nut driver, remove the pointy 19 mm screw on each white plastic side panel.

Step 4

Once the screws are removed, take off the side panels by pulling them up and away from the toaster oven. It may take a little bit of wiggling to get them free.

Once the screws are removed, take off the side panels by pulling them up and away from the toaster oven. It may take a little bit of wiggling to get them free.

Step 5

Remove the gray piece of metal on the bottom front (it will be on the top though because the toaster oven is upside down).

Remove the gray piece of metal on the bottom front (it will be on the top though because the toaster oven is upside down).

Step 6

Use the knob on the crumb tray to lift it up.
Slide the thin metal tab on the bottom of the tray out of the ring on the toaster oven.

Use the knob on the crumb tray to lift it up.

Slide the thin metal tab on the bottom of the tray out of the ring on the toaster oven.

Step 7

Use a Phillips #1 screwdriver to remove the two pointy 10 mm screws on both ends of the metal bar under the toaster oven door (currently on top because the device is upside down).

Use a Phillips #1 screwdriver to remove the two pointy 10 mm screws on both ends of the metal bar under the toaster oven door (currently on top because the device is upside down).

Step 8

Slide the metal bar (that you just removed the screws from) up to remove it.

Slide the metal bar (that you just removed the screws from) up to remove it.

Step 9

Using a 1/4 inch nut driver, remove the 10 mm screws on the back of the toaster oven.
Turn the toaster oven so it is right side up

Using a 1/4 inch nut driver, remove the 10 mm screws on the back of the toaster oven.

Turn the toaster oven so it is right side up

Step 10

Grabbling the bottom of the piece of metal you just removed the screws from, lift that piece up until it comes away from the toaster oven.

Grabbling the bottom of the piece of metal you just removed the screws from, lift that piece up until it comes away from the toaster oven.

Step 11

On the side of the toaster oven with the majority of the internal mechanisms, there is a spring. Remove the spring by unhooking each end from the toaster oven.

On the side of the toaster oven with the majority of the internal mechanisms, there is a spring. Remove the spring by unhooking each end from the toaster oven.

Step 12

On the side of the door away from the controls, slide the tab away from the side of the toaster oven.
On the same side as the controls, slide the ring on the door along the wire that holds it to the toaster oven until it comes free.

On the side of the door away from the controls, slide the tab away from the side of the toaster oven.

On the same side as the controls, slide the ring on the door along the wire that holds it to the toaster oven until it comes free.

Step 13

Congratulations, you have successfully completed a teardown of a Black and Decker Toast R Oven TRO405.
There are some very cool internal mechanisms on the side of the toaster oven! We can’t take them apart without causing permanent damage to the machine because they’re all riveted together, but we encourage you to try to figure out how they work!

Congratulations, you have successfully completed a teardown of a Black and Decker Toast R Oven TRO405.

There are some very cool internal mechanisms on the side of the toaster oven! We can’t take them apart without causing permanent damage to the machine because they’re all riveted together, but we encourage you to try to figure out how they work!

Cancel: I did not complete this guide.

Attached Documents

Toaster Oven Schematic
PDF - 1.02 mb
View

Toaster Oven Schematic

PDF - 1.02 mb

Author

                                      with 3 other contributors

                    Caroline

Member since: 09/16/2021

217 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       Tufts University School of Engineering, Team 36-13, Bell Fall 2021                        

                                                  Member of Tufts University School of Engineering, Team 36-13, Bell Fall 2021 



                    TUFTS-BELL-F21S36G13                     


                                            3 Members                     


                                            1 Guide authored

Introduction#

What you need#

Attached Documents#

Team#

Introduction

What you need

Attached Documents

Team