Difficulty

Moderate

Steps

9

Time Required

                          10 - 15 minutes

Sections

3

  • Battery
  • 3 steps
  • Rear Case
  • 3 steps
  • Volume Toggle
  • 3 steps

Flags

0

  • BackBlackBerry Bold 9000

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Battery
  • Place your Blackberry facedown in front of you.

Place your Blackberry facedown in front of you.

1024

Step 2

  • Press the cover release button on the bottom of your device. Lift and remove the back cover.

Press the cover release button on the bottom of your device. Lift and remove the back cover.

Step 3

  • From the top, use your fingernail to lift the battery out.

From the top, use your fingernail to lift the battery out.

Step 4

              Rear Case
  • Remove the SIM card.

Remove the SIM card.

Step 5

  • Remove the six 7.0mm Torx screws securing the rear case to the rest of the phone.

Remove the six 7.0mm Torx screws securing the rear case to the rest of the phone.

Step 6

  • Use the plastic opening tool to remove the rear case.

Use the plastic opening tool to remove the rear case.

Step 7

              Volume Toggle
  • Lift out the motherboard assembly using the plastic opening tool, prying at all four sides of the device.
  • Try to remove from left to right, using caution with the audio jack on the right side of the device.

Lift out the motherboard assembly using the plastic opening tool, prying at all four sides of the device.

Try to remove from left to right, using caution with the audio jack on the right side of the device.

Step 8

  • Locate the volume toggle on the main frame of the phone.
  • Using the spudger, push the toggle in from the outside and remove.

Locate the volume toggle on the main frame of the phone.

Using the spudger, push the toggle in from the outside and remove.

Step 9

  • Place the new toggle in, using the pointed end of the spudger to attach the toggle to the upper and lower pins.
  • Make sure the toggle is completely in place by pressing it outward into the frame.

Place the new toggle in, using the pointed end of the spudger to attach the toggle to the upper and lower pins.

Make sure the toggle is completely in place by pressing it outward into the frame.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 4 other contributors 


                    Kelly

Member since: 01/18/2012

566 Reputation

                                      6 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       Cal Poly, Team 8-17, Maness Winter 2012                        

                                                  Member of Cal Poly, Team 8-17, Maness Winter 2012 



                    CPSU-MANESS-W12S8G17                     


                                            4 Members                     


                                            7 Guides authored