Difficulty

Moderate

Steps

8

Time Required

                          10 - 15 minutes

Sections

3

  • Battery
  • 2 steps
  • SIM Card
  • 2 steps
  • Back Chassis
  • 4 steps

Flags

2

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackBlackberry Bold 9650

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Battery
  • Turn the device upside down.
  • Using your finger, slide the silver cover release button towards the top of the device.
  • Lift and remove the back cover.

Turn the device upside down.

Using your finger, slide the silver cover release button towards the top of the device.

Lift and remove the back cover.

1024

Step 2

  • Using your fingernails, lift the sides of the battery.
  • Remove the battery.

Using your fingernails, lift the sides of the battery.

Remove the battery.

Step 3

              SIM Card
  • Orient the device so that the screen is facing the ground.
  • Using your finger, gently lift the top of the SIM card.

Orient the device so that the screen is facing the ground.

Using your finger, gently lift the top of the SIM card.

Step 4

  • Gently pull out the SIM card.
  • The card will break in half if you apply too much force when pulling out the card.

Gently pull out the SIM card.

The card will break in half if you apply too much force when pulling out the card.

Step 5

              Back Chassis
  • Using a T6 Torx screwdriver, remove the four screws from the bottom half of the device.

Using a T6 Torx screwdriver, remove the four screws from the bottom half of the device.

Step 6

  • Orient the device so that the screen is facing you.
  • Using a spudger, remove the ear piece cover.

Orient the device so that the screen is facing you.

Using a spudger, remove the ear piece cover.

Step 7

  • Using a T6 Torx screwdriver, remove the two screws from the top corners of the device.

Using a T6 Torx screwdriver, remove the two screws from the top corners of the device.

Step 8

  • Remove the back chassis by gently pulling the chassis back and forth.
  • The headphone jack can break if the chassis is pulled too forcefully.

Remove the back chassis by gently pulling the chassis back and forth.

The headphone jack can break if the chassis is pulled too forcefully.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.

Author

                                      with 9 other contributors 


                    Ryan

Member since: 03/12/2012

663 Reputation

                                      11 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       Clemson, Team 2-5, Benson Spring 2012                        

                                                  Member of Clemson, Team 2-5, Benson Spring 2012 



                    CLEM-BENSON-S12S2G5                     


                                            2 Members                     


                                            14 Guides authored