Blackberry Bold 9700 Memory Card Socket Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

Suggest a time??

Sections

Motherboard Housing
10 steps
Memory Card Socket
2 steps

Flags

BackBlackBerry Bold 9700
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Motherboard Housing

Remove the battery by prying the bottom of the battery upward.
Once the battery is angled up, pull it away from the top of the device.
Be sure to remove all power sources before working on electronic devices to avoid harming yourself or the device.

Remove the battery by prying the bottom of the battery upward.

Once the battery is angled up, pull it away from the top of the device.

Be sure to remove all power sources before working on electronic devices to avoid harming yourself or the device.

1024

Step 2

Slide the SIM card from underneath the holding bracket upward toward the battery connector pins.
You must remove the SIM card before you can fully disassemble the device. Failure to do so may cause damage to components later on in this process.

Slide the SIM card from underneath the holding bracket upward toward the battery connector pins.

You must remove the SIM card before you can fully disassemble the device. Failure to do so may cause damage to components later on in this process.

Step 3

Pry off the AT&T logo panel with the plastic opening tool.
You will hear a snapping sound as the plastic tabs pop out.

Pry off the AT&T logo panel with the plastic opening tool.

You will hear a snapping sound as the plastic tabs pop out.

Step 4

Use your T5 Torx screwdriver to remove the two black 5.57mm Torx head screws underneath the keyboard.

Use your T5 Torx screwdriver to remove the two black 5.57mm Torx head screws underneath the keyboard.

Step 5

Use the plastic opening tool to remove the frame of your device.
You will hear a snapping sound as the tabs pop out.
Once the case is loosened from the device, slide the case away from the top of the phone.

Use the plastic opening tool to remove the frame of your device.

You will hear a snapping sound as the tabs pop out.

Once the case is loosened from the device, slide the case away from the top of the phone.

Step 6

Gently lift the bottom of the keyboard upward.
Pull the keyboard away from the bottom of the LCD display and lift upward.

Gently lift the bottom of the keyboard upward.

Pull the keyboard away from the bottom of the LCD display and lift upward.

Step 7

Remove the two Torx head 4.13mm steel screws with your T5 Torx screwdriver.

Remove the two Torx head 4.13mm steel screws with your T5 Torx screwdriver.

Step 8

Gently pry up the ribbon connector at the top of the phone with a plastic opening tool.
Ribbon connectors are fragile. Too much force in the wrong place will damage the ribbon and may force you to replace an entire assembly.

Gently pry up the ribbon connector at the top of the phone with a plastic opening tool.

Ribbon connectors are fragile. Too much force in the wrong place will damage the ribbon and may force you to replace an entire assembly.

Step 9

Remove the top two Torx head 4.13mm steel screws with your T5 Torx screwdriver.
You should now have two 5.57mm black torx head screws and four 4.13mm steel Torx head screws off to the side. Do not lose them.
Lift the clear plastic cover directly upward.

Remove the top two Torx head 4.13mm steel screws with your T5 Torx screwdriver.

You should now have two 5.57mm black torx head screws and four 4.13mm steel Torx head screws off to the side. Do not lose them.

Lift the clear plastic cover directly upward.

Step 10

Grip the motherboard by the screen
Lift the board away from the base of the housing and vertically up.

Grip the motherboard by the screen

Lift the board away from the base of the housing and vertically up.

Step 11

              Memory Card Socket

Use plastic opening tool to pry away tiny metal arm that is holding the socket in place.
Lift SD memory card socket away from phone housing till it is removed.

Use plastic opening tool to pry away tiny metal arm that is holding the socket in place.

Lift SD memory card socket away from phone housing till it is removed.

Step 12

Align new SD memory card socket into the socket housing and connect tiny metal arm.
Apply pressure to the top of new SD Memory card socket.
Once the SD memory card socket is correctly placed in the housing you are done.

Align new SD memory card socket into the socket housing and connect tiny metal arm.

Apply pressure to the top of new SD Memory card socket.

Once the SD memory card socket is correctly placed in the housing you are done.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors

                    Danny

Member since: 03/11/2015

365 Reputation

                                      3 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Colorado Springs, Team 9-3, Panko Spring 2015                        

                                                  Member of Colorado Springs, Team 9-3, Panko Spring 2015 



                    UCCS-PANKO-S15S9G3                     


                                            2 Members                     


                                            7 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team